Parting 5 fj40's

[daniel.watters]

i need parts

original steel wheels/5
ashtray 1
Wheel cyl Kit Front & Rear
Brake Master Cyl
Brake Drums (4)
hub caps; 2 front 3 rear
2 round turn signal lenses

let me know!

 

[CruisinMT]

do you still have the gauge cluster from the 66?

 

[too tall]

Do you have a nice gas tank for a 74' ?

 

[Hugh Heifer]

Looking for a Wiper Motor for a '71 or similar

 

[hatfieldcb]

Hey Crockett, your PM box is full!

Got any door hinges?

 

[aksnowryder]

Hi, I'm looking for the pieces that go above the doors, bolt to the windshield frame and the rear panels. Kinda filler pieces between the top and doors. Don't know what they are called. My 40 is a 72. Can you help?

Please PM me with an email address to reach you.

Thanks!

 

[jvanhove]

Doors

Crocket,

I'm looking for a set of 40 series driver / passenger doors

ALSO I need a set of rear ambulance doors.

Both sets in good cond. if you have them at all,

Cheers

Justin

 

[tad3kids]

1970 1F header

I need a header for my 1970 1F

 

[starman]

tail gate

Need a drop down tail gate for a 78 fj40. Got one?

 

[LCOwner]

I'm looking for a 3 speed bell housing. Please PM me if you do. Thanks.

 

[island45]

And I'm looking for a 4 sp bellhousing with engine mounts. I live on Orcas Island. Where are you located? Thanks, Gary

 

[my64fj40]

Looking for a tail lamp cover.

PM me if you got it.

More info and pic here
https://forum.ih8mud.com/wanted-parts-tires-wheels/195492-tail-lamp-cover.html


Thanks

 

[3pits]

looking for a working carburator for a 78 or so linkage and insulator plate, I may have the insulator and linkage lined up so if you only have the carb that is ok

 

[chaka]

Looking for a 75 exhaust manifold with CA emissions ports...
THanks

 

[roger lenz]

fj 40

i need a window frame for my fj 40, its a 1979? if could call me at 407- 463- 5952.thank you.

 

[crockett]

79 winshield frame

Sorry no late model frames right now I do have 3 early style windshield frames Dave

 

[McGruff44]

Firewall Brace Needed

Would you happen to have the brace that is on the drivers side firewall in the engine compartment? I have posted a photo of the item below. I need the complete brace, it runs down the firewall to just under the tub.
Thanks for looking,
Vern

 

[UNCFj40]

do you have any working speedo assemblies? im looking for the part that the speedo cable plugs into on the back of the cluster. this part

 

[Willard]

Looking for a 4 speed Shifter Assembly. the one that came with my tranny was bent for a project.

 

[WheelingPiazza]

I am looking for a windsheild wiper switch for a 70 I think (wiper motor on the windsheild)

Email or PM me if you have one

Stevep@wheelingpiazzas.com

steve