Hi just wondering if this is the rite part# for an oil filter for a 2Lt. Part #90915-30002?
oil filter #
- Thread starter BC-Cruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes, that's the right #.
crushers
post ho
depnds on the year, the older 2LT used a different filter than the newer 1990+
- Thread starter
- #5
i've got an 89 lj71 2lt
crushers
post ho
up to 87/08 it is the same as the 3B after that it is the 30002...
cheers
cheers
crushers
post ho
Rick please clarify...
are you saying the 30002 does not fit the 2LT after 87/08 and all the 2LTE engines?
i've got the 30002 on my 2L-TE (1990).
So it sounds like the old 2L and 2L-T will fit the 3B filter, but the newer 2L-T II and 2L-TE will not?
So it sounds like the old 2L and 2L-T will fit the 3B filter, but the newer 2L-T II and 2L-TE will not?
Oil filters 2L-TE vs. 3B
The 1989 / 1990 / 1991 Prado with 2L-TE filters definitely are not interchangeable with the 3B oil filters.
The 3B takes the Fram PH8A oil filter or any cross reference. This is a cheap filter also used on gas engines. I hope it's a good filter.
The Prado 2L-TE oil filter is a different beast altogether.
It is a rather large oil filter with a 24mm dia. thread x 1.5mm pitch.
I have used a Toyo brand oil filter part # T0-1216M
As well the smaller Toyo brand part # TO-1214M also fits which is what my Townace had and has a WIX cross reference available at local Napa auto parts. I believe that was WIX $52368 and was about $24. This was the Camry diesel oil filter that was available here in Canada for a short time in the mid 80s.
The terrain tamer jobber brand available at 4WheelAuto in Edmonton seems OK too.
I don't know if this helps or not.
Cheers,
Roman
The 1989 / 1990 / 1991 Prado with 2L-TE filters definitely are not interchangeable with the 3B oil filters.
The 3B takes the Fram PH8A oil filter or any cross reference. This is a cheap filter also used on gas engines. I hope it's a good filter.
The Prado 2L-TE oil filter is a different beast altogether.
It is a rather large oil filter with a 24mm dia. thread x 1.5mm pitch.
I have used a Toyo brand oil filter part # T0-1216M
As well the smaller Toyo brand part # TO-1214M also fits which is what my Townace had and has a WIX cross reference available at local Napa auto parts. I believe that was WIX $52368 and was about $24. This was the Camry diesel oil filter that was available here in Canada for a short time in the mid 80s.
The terrain tamer jobber brand available at 4WheelAuto in Edmonton seems OK too.
I don't know if this helps or not.
Cheers,
Roman
