Official ONSC member buying/selling thread (4 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I had thought I had posted this Friday on here but I guess I did not go through. In my 2nd stage of clearing out the garage now and getting rid of some stuff and selling other things. I'm.going to copy and paste fro. One of the 5 other sites I frequent and put this list up on. Not all is cruiser stuff and some things have already be claimed. But since I'm doing this on my phone in not going to.cut the sold items out but will indicate that they are sold. First come first serve but they are on 5 other websites so ill be checking time stamps to.be fair 
3FE intake manifold. I got it to port and polish but never got around to it. $40 SOLD
80 series front axle housing. Housing only $100
Front drivers, both rear door and sunroof glass for 80 series $100
wix filters for any 4cylinder toyota 1990 up. - 1 beer
tire tread gauge -free
12quarts of ac Delco manual trans fluid for NV4500. I've had these since we closed down a retail store at my old job 5 years ago and was told to scrap everything left in the building after the moving guys cleared it out. These were in a cabinet that was locked untill we fixed it open. Always thought I was going to.do a swap into my 80 so I kept them would love to hang on to them for my future suburban swap but with a possible move looking I'm lightening the load. 12 quarts -$50 SOLD
camping stove with toaster oven and 2 burners. Will post pic soon. Runs off of propane $30
LS6 intake, had this for 13 years, cant see myself hanging on to it anymore 6 pack of a good porter. SOLD
Small 2 person tent. Pics to come soon $30
ARB locker for Toyota 8" pumpkin. Will not work with HP 80 front per ARB. Was pulled from the rear of a 4cylinder 4runner. Needs a small repair. Pics.to.come.soon. $100 sold as is... Old ARB model.
Old rusty 40 series grill and bezel. Was going to use for wall art. 6 pack of beer SOLD
Same thing but a CJ8 clip. 6 pack SOLD
1000 watt inverter. Have 2 don't need them both $25 SOLD
Ported LSX throttle body. Think it was from a LS6 but can't remember $85 SOLD
New valves for Cummins 6bt (would also.work for 4bt with extras) Had from my old job also. Cannot remember brand. $40 SOLD
front 80 series races that have been ground down to simplify installation of new races when doing wheel bearings. 1 22oz bomber
more will be added along with pics.in the coming weeks
Craftsman Scroll saw $40 SOLD
Edit: 8-11
6bt injectors, low miles bought when I thought I was doing a 4BT swap
6 of them $100
Grid heater for 4BT $10
4 more qts for NV4500 $30
80 series radiator used - 6 pack
Who needs a road - book $30
Eventually i'll have some storage racks, 3000PSI honda pressure washer, Toro self propelled mower and a bunch of furniture for sale
3FE intake manifold. I got it to port and polish but never got around to it. $40 SOLD
80 series front axle housing. Housing only $100
Front drivers, both rear door and sunroof glass for 80 series $100
wix filters for any 4cylinder toyota 1990 up. - 1 beer
tire tread gauge -free
12quarts of ac Delco manual trans fluid for NV4500. I've had these since we closed down a retail store at my old job 5 years ago and was told to scrap everything left in the building after the moving guys cleared it out. These were in a cabinet that was locked untill we fixed it open. Always thought I was going to.do a swap into my 80 so I kept them would love to hang on to them for my future suburban swap but with a possible move looking I'm lightening the load. 12 quarts -$50 SOLD
camping stove with toaster oven and 2 burners. Will post pic soon. Runs off of propane $30
LS6 intake, had this for 13 years, cant see myself hanging on to it anymore 6 pack of a good porter. SOLD
Small 2 person tent. Pics to come soon $30
ARB locker for Toyota 8" pumpkin. Will not work with HP 80 front per ARB. Was pulled from the rear of a 4cylinder 4runner. Needs a small repair. Pics.to.come.soon. $100 sold as is... Old ARB model.
Old rusty 40 series grill and bezel. Was going to use for wall art. 6 pack of beer SOLD
Same thing but a CJ8 clip. 6 pack SOLD
1000 watt inverter. Have 2 don't need them both $25 SOLD
Ported LSX throttle body. Think it was from a LS6 but can't remember $85 SOLD
New valves for Cummins 6bt (would also.work for 4bt with extras) Had from my old job also. Cannot remember brand. $40 SOLD
front 80 series races that have been ground down to simplify installation of new races when doing wheel bearings. 1 22oz bomber
more will be added along with pics.in the coming weeks
Craftsman Scroll saw $40 SOLD
Edit: 8-11
6bt injectors, low miles bought when I thought I was doing a 4BT swap
6 of them $100
Grid heater for 4BT $10
4 more qts for NV4500 $30
80 series radiator used - 6 pack
Who needs a road - book $30
Eventually i'll have some storage racks, 3000PSI honda pressure washer, Toro self propelled mower and a bunch of furniture for sale
Last edited:
How is everything I want sold already 
NCFJ
Supporting Vendor
Murphy's law as it applies to tools and such Johnny. Do you scan the CL tools section? I do every so often and have found some good deals local to me. Something to do over mindless Sun morning coffee. I picked up both my chain hoists at a local pawn shop for $130 if memory serves
100 series on CL w/ 85K miles for $10700. Looks clean from the few pics on there. Wish I was still in the market...
http://raleigh.craigslist.org/cto/5094259265.html
http://raleigh.craigslist.org/cto/5094259265.html
RedHeadedStepChild
Proudly wearing my MC1R mutation!
ARB locker for Toyota 8" pumpkin. Will not work with HP 80 front per ARB. Was pulled from the rear of a 4cylinder 4runner. Needs a small repair. Pics.to.come.soon. $100 sold as is... Old ARB model.
Al, you have a model number? I want to determine if this would work for the 2001 V6. Whats the repair?
Al, you have a model number? I want to determine if this would work for the 2001 V6. Whats the repair?
elkaholic
Left turn ...freakin wipers!
Not Cruiser Related
But I thought I would post up here before fighting with the hordes on the CL
We have a set of patio / deck furniture that needs to be gone ... It consists for a glass / slate top table, 4 side chairs, 2 end chairs, and an umbrella and stand. Made by Hampton bay, sold through Home Despot
. The setup was simply too large for our tiny tract-builder patio so its gotta go. We've had it for 3 years or so and shows some age, but is still in generally good shape. Some minor corrosion on a table leg and on one chair where the powder coat applied in China met the general impression of Chinese quality 
$100 .... bring a truck or trailer ...
Following Pics show the defects described ....
But I thought I would post up here before fighting with the hordes on the CL
We have a set of patio / deck furniture that needs to be gone ... It consists for a glass / slate top table, 4 side chairs, 2 end chairs, and an umbrella and stand. Made by Hampton bay, sold through Home Despot
. The setup was simply too large for our tiny tract-builder patio so its gotta go. We've had it for 3 years or so and shows some age, but is still in generally good shape. Some minor corrosion on a table leg and on one chair where the powder coat applied in China met the general impression of Chinese quality $100 .... bring a truck or trailer ...
Following Pics show the defects described ....
RedHeadedStepChild
Proudly wearing my MC1R mutation!
I've grown tire of working around these. New price is make an offer: cash or trade and we can talk
15" Alloy Rims
9" wide
6 x 5.5" lug pattern
3.5" back spacing
These fit fine with disk brakes.
15" Alloy Rims
9" wide
6 x 5.5" lug pattern
3.5" back spacing
These fit fine with disk brakes.
SOLD
Mine, I can bring to Marshall's parts swap if any of y'all are interested.
Remington 870 Super Express Magnum 12 gauge, Realtree pattern, chambered to fire 2.75,3 in, and 3.5 inch shells. Set up for Turkey with a turkey choke and recoil pad. I have a Realtree soft case for it as well. No scratches or dings, only fired about 50 rounds through it. I can get some pictures of it tonight.
Retails new for between $375-$575 + tax depending on options. The 870’s are very customizable if you wanted to add a different barrel or pistol stock, etc.
Asking $275. $300 I’ll throw in 3 boxes of shells.
Mine, I can bring to Marshall's parts swap if any of y'all are interested.
Remington 870 Super Express Magnum 12 gauge, Realtree pattern, chambered to fire 2.75,3 in, and 3.5 inch shells. Set up for Turkey with a turkey choke and recoil pad. I have a Realtree soft case for it as well. No scratches or dings, only fired about 50 rounds through it. I can get some pictures of it tonight.
Retails new for between $375-$575 + tax depending on options. The 870’s are very customizable if you wanted to add a different barrel or pistol stock, etc.
Asking $275. $300 I’ll throw in 3 boxes of shells.
Last edited:
jfz80
Cruisin’
Don't think so James. At least not an active member. It's been around Greensboro for years over off Elam and spring garden. Ill go look at it with you if you like.
?s to ask him
- didnt think skyjacker made 6" springs. Had only seen 2.5"
-ask if center diff lock equipped o axle diff lock cause 92 would not have had diff lock option from factory
-miles and maint done to 3fe and axles
-will you take $4000
?s to ask him
- didnt think skyjacker made 6" springs. Had only seen 2.5"
-ask if center diff lock equipped o axle diff lock cause 92 would not have had diff lock option from factory
-miles and maint done to 3fe and axles
-will you take $4000
You think at 4k it's a decent price?
What's the towing capability like for one of these? I'd like to tow a 5000 lb boat at some point....
I'm trying to replace the suburban (since the wife won't let me have ANOTHER car...)
What's the towing capability like for one of these? I'd like to tow a 5000 lb boat at some point....
I'm trying to replace the suburban (since the wife won't let me have ANOTHER car...)
WTB:
- Saginaw or FJ60 steering box or PS conversion parts for a 40.
- AA t-case crossmember and/or SBC engine mounts
- 5.7 vortec (running or rebuildable)
people have towed that much with a 3fe. If you search the 80 section you will find threads. I wouldn't really want to nor would I do it without at least upgrading the brakes to a 1fz kit. That being said I wouldn't really want to tow with a 1fz 80 either. I've towed with both and they aren't really towing machines. They "ok" on the flats. If you are looking to tow id keep the suburban. Way more spacious and comfortable than am 80 to tow long trips with. Or if you want to go yota, think sequoia or 100 series. If not going to wheel it at all go sequoia as they are thousands cheaper than 100s in similar condition.
for a rebuildable vortec. Pull a part will be your friend. Cant beat the price
4k would not be bad.
As mentioned .... winch bumper and rack = nice. Will have center diff lock only, and the 3FE is kinda low on HP for such a heavy rig. I don't know lifts so can't help there except to say it sure doesn't look like 6 inches (insert wife jokes here).
I'll go with you also to take a look.
Rice
I have a AA cross member here. I have some really good never used engine mounts for a V8 for a 40 series. Made by a guy out west years back.
I posted a list somewhere on here for all the stuff needed to bolt in a FJ60 box. Along with where to buy each part.
@jamesurq .... 190K miles, no lockers but has 1FZ-FE engine.
Asking $3900 so can be yours for $3500. Ta-dah.
http://washingtondc.craigslist.org/doc/cto/5100500426.html
Asking $3900 so can be yours for $3500. Ta-dah.
http://washingtondc.craigslist.org/doc/cto/5100500426.html
jfz80
Cruisin’
Mike is this for a second 40? I thought I recalled your build being along the lines of slightly modded but mostly stock
I have an AA crossmember tail support as well but sounds like you could get a few things crossed off your list through Darin.
And for @jamesurq again.
Buy rig for $3000, Sell SC for $3000. Free cruiser.
http://washingtondc.craigslist.org/nva/cto/5104729992.html
Buy rig for $3000, Sell SC for $3000. Free cruiser.
http://washingtondc.craigslist.org/nva/cto/5104729992.html
