It'll grow back.
Official ONSC member buying/selling thread
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Couple of interesting things on Clist:
Turbo Diesel '85: https://raleigh.craigslist.org/cto/5089113911.html
Clean looking '02 100 w/ 158K, for $13.7K: https://raleigh.craigslist.org/cto/5090223859.html
Turbo Diesel '85: https://raleigh.craigslist.org/cto/5089113911.html
Clean looking '02 100 w/ 158K, for $13.7K: https://raleigh.craigslist.org/cto/5090223859.html
No F/R lockers
That was my guess. Why in the world didn't lockers come standard on the 40th edition. Sorry man.
jfz80
Cruisin’
No F/R lockers
$300 Aussie will take you lots of places.
Indeed! Best upgrade I ever made on mine!
lumbee1
Native American
Alright guys and gals, my uncle has fallen on hard times and is being forced to sell his shop equipment. I am just trying to help him out.
ALL OF THESE PRICES ARE NEGOTIABLE
If you feel as though these prices are out of line for market demand, please let me know through PM so that I may adjust accordingly.
The items will be posted on Raleigh and Fayetteville Craigslist shortly for slightly higher prices. I wanted to give you guys a chance first.
One more item I didn't list was a 2 post 9000lb AccuTurn lift from Summit Racing. I don't know the status of the lift yet.
Metal band saw on casters $95
Cherry Picker $100
Engine stand $40
Craftsman Scrollsaw $30
Aluminum Jack $70
ALL OF THESE PRICES ARE NEGOTIABLE
If you feel as though these prices are out of line for market demand, please let me know through PM so that I may adjust accordingly.
The items will be posted on Raleigh and Fayetteville Craigslist shortly for slightly higher prices. I wanted to give you guys a chance first.
One more item I didn't list was a 2 post 9000lb AccuTurn lift from Summit Racing. I don't know the status of the lift yet.
Metal band saw on casters $95
Cherry Picker $100
Engine stand $40
Craftsman Scrollsaw $30
Aluminum Jack $70
Last edited:
lumbee1
Native American
Husky Air Compressor 60 gallon 220V 135psi 11.8@40psi 10.3@90psi $450
This is almost brand new.
Old German Metal Mill with digital micrometers and bits $4200
9in metal lathe with bits $1500
This is almost brand new.
Old German Metal Mill with digital micrometers and bits $4200
9in metal lathe with bits $1500
Went to look at this 60 yesterday: http://charlotte.craigslist.org/cto/5088009402.html
It's really rusty but it seems to be a good runner. I fired it up and it ran well. Idled up a bit high but no smoke and ran smooth. The xfer case output seal is leaking. I didn't drive it but the owner said it drives and stops and it is tagged and insured. The worst rust to fix is around the rain gutter pretty much all the way around. There are a couple of rust through spots in the floors - passenger side rear wheel well and passenger front floorboard. Of course the DS lower QP is swiss cheese. The truck has a busted windshield but it comes with a replacement. Lots of spares and take-off parts to include four solid doors, windshield, patch panels, 2 carbs, etc. The owner was very nice and was interested in hearing about our group. He thinks he may know one or two folks already. I may drag him to one of our upcoming events. He has a beautiful 100 series with 70K miles on it. I tried to buy that one but no dice! I believe the owner will take $1,800 for this 60. It's probabably worth close to that in parts alone but it is a project that would take A LOT of work.
It's really rusty but it seems to be a good runner. I fired it up and it ran well. Idled up a bit high but no smoke and ran smooth. The xfer case output seal is leaking. I didn't drive it but the owner said it drives and stops and it is tagged and insured. The worst rust to fix is around the rain gutter pretty much all the way around. There are a couple of rust through spots in the floors - passenger side rear wheel well and passenger front floorboard. Of course the DS lower QP is swiss cheese. The truck has a busted windshield but it comes with a replacement. Lots of spares and take-off parts to include four solid doors, windshield, patch panels, 2 carbs, etc. The owner was very nice and was interested in hearing about our group. He thinks he may know one or two folks already. I may drag him to one of our upcoming events. He has a beautiful 100 series with 70K miles on it. I tried to buy that one but no dice! I believe the owner will take $1,800 for this 60. It's probabably worth close to that in parts alone but it is a project that would take A LOT of work.
well I just sold my 60 'project' that sounds to be in much better shape than that one for not much more $.
Maybe I sold too low?
darn.
Maybe I sold too low?
darn.
Sold
ontherxs
They call me Tim...
lumbee1
Native American
There was a drill press in the bunch. It's been sold to my father. Martin has dibs on the bandsaw for now.
I would love to have the air compressor but it is too big for my tiny garage.
For those interested in something in the list, there are always extras included in the sale. We are attempting to clear out the entire shop before it becomes an estate sale.
Is the press spoken for yet ? If not i would like to speak for it.
lumbee1
Native American
Nope. You have first dibs on it. Lucky for you, the press is in Parkton, right around the corner from you.
I will take it.
lumbee1
Native American
Done. I've removed it from the list so the page loads faster.
lumbee1
Native American
Torch is off the list... for now. Rice has first dibs if it becomes available again. I will remove it from the list above.
