I have some I could part with
Official ONSC member buying/selling thread (12 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have some I could part with
OB-1
SILVER Star
I have a pair off of my '01 LX470
No affiliation
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
SFROMAN
SILVER Star
3FE for sale $400 OBO.
Located in Raleigh NC.
came out of a 92/93 80 series. Compression test does show cylinder 1 or 6 (can’t remember) kind of low.
The 3FE was running in his daily driven 80 when pulled by owner to do a V8 swap.
My plan was to bring long block to the machine Shop and have it completely rebuilt and put it into my 62 but I am going in a different direction so I don’t need it anymore and need the space.
My schedule is pretty open usually so hit me up if your interested
Will post photos later
Located in Raleigh NC.
came out of a 92/93 80 series. Compression test does show cylinder 1 or 6 (can’t remember) kind of low.
The 3FE was running in his daily driven 80 when pulled by owner to do a V8 swap.
My plan was to bring long block to the machine Shop and have it completely rebuilt and put it into my 62 but I am going in a different direction so I don’t need it anymore and need the space.
My schedule is pretty open usually so hit me up if your interested
Will post photos later
LCNuts
SILVER Star
Looking for a 2f head for a FJ60
ONSC Fam,
Bump - let me know if you see anything.
I will finally be ready for a topless LC. 40/43/70/73, etc.
I looking for a 40 footer. Minimal rust. Might need some minor work. Not concerned with a factory hardtop or doors. This truck will be used to run around Oriental, NC. The top and doors will stay off. I would prefer a manual with a Toyota engine, either diesel or gasoline.
If you see anything, please let me know. I am not concerned about the color.
And if you have any other places to check besides craigs, mud and fb marketplace, please let me know.
Budget is $15 to $20k. Prefer lower and put in work if possible. Ready to buy at the end of July.
Thank you.
Bump - let me know if you see anything.
I will finally be ready for a topless LC. 40/43/70/73, etc.
I looking for a 40 footer. Minimal rust. Might need some minor work. Not concerned with a factory hardtop or doors. This truck will be used to run around Oriental, NC. The top and doors will stay off. I would prefer a manual with a Toyota engine, either diesel or gasoline.
If you see anything, please let me know. I am not concerned about the color.
And if you have any other places to check besides craigs, mud and fb marketplace, please let me know.
Budget is $15 to $20k. Prefer lower and put in work if possible. Ready to buy at the end of July.
Thank you.
LCNuts
SILVER Star
How about an 86 4runner?
Please provide details. Only interested in manual transmission vehicles.
If you want a 70 series contact Chris at Car Cave Akin SC
He imports a lot and has some nice specimens in his showroom at the moment.
That bj is exactly what I am looking for. I reached out. Thank you.
He has a few is saw two weeks ago that are not on the web site.
Hello, ONSC Club. I'm new and haven't been able to make it to any of the local meetups, but hope to soon. I have owned an 88 FJ62 for all of 6 months and am ready for a V8 swap (3 guesses as to why I call it the LandSnoozer).
Anyway, I've kept an eye on the classifieds and noticed that 3FEs don't tend to move particularly fast. So I thought I'd list mine now in the hopes that it will be gone by the end of my swap.
Details: 1988 3FE (de-smogged) and A440 transmission; both seem to run fine; 206591 on the odometer; compression #s: 1-155, 2-145, 3-150, 4-150, 5-150, 6-150.
Asking $2,000 for the complete set (less the transfer case)
The engine is still in the vehicle if you want to come see it. However, I think I'm going to start the removal process in the next week or so.
Wish me luck.
Anyway, I've kept an eye on the classifieds and noticed that 3FEs don't tend to move particularly fast. So I thought I'd list mine now in the hopes that it will be gone by the end of my swap.
Details: 1988 3FE (de-smogged) and A440 transmission; both seem to run fine; 206591 on the odometer; compression #s: 1-155, 2-145, 3-150, 4-150, 5-150, 6-150.
Asking $2,000 for the complete set (less the transfer case)
The engine is still in the vehicle if you want to come see it. However, I think I'm going to start the removal process in the next week or so.
Wish me luck.
Diff Kraken
SILVER Star
I have a couple 5th Gen 4Runner goodies up for grabs... they're priced to move, but I'll give an extra good MUD price for anyone interested and potential theoretical MUDship via @JohnVee (in such a case, I assume beer, BBQ, or ammo would be appreciated as MUDship compensation
SOLD
OEM Rock Rails / Rock Sliders
RCI Front Skid and Filler
Last edited:
To tag on to the 5th Gen 4Runner items 
I have some like new Marathon Seat Covers. We hadn't installed the lower seat yet and the back and armrest are like new. $300+ new - $120 Used.
We also have both driver and passenger side Orange Boxx 5th Gen PSD Molle panels for the rear windows. $389 new, Two-fer @ $180 still new in box.
I have some like new Marathon Seat Covers. We hadn't installed the lower seat yet and the back and armrest are like new. $300+ new - $120 Used.
| 340-15 |
| Item No: 340-15 Vehicle: 2020 Toyota 4Runner Color 1: Dark Gray Cordura Nylon Option: Center Console Lid Cover (Console Opens) Option: Driver Side Map Pocket on Backrest Option: Passenger Side LARGE Gear Pocket 12"w x 8"h |
We also have both driver and passenger side Orange Boxx 5th Gen PSD Molle panels for the rear windows. $389 new, Two-fer @ $180 still new in box.
For 1st Gen Tacoma - Full length w/ cross member, belly plate and front skid: aluminum skid plates - new in Box from Budbuilt. Cost is ~$1200 new. Taking offers . . .
Last edited:
A friend and former teammate at work is selling his 2021 Land Cruiser Heritage Edition. I don’t have a lot of details and will connect interested parties directly to my friend. Plans are to list on BAT in a couple weeks if he doesn’t sell it beforehand. Below is the only recent picture he provided.
Asking Price: $105k
Willing to consider a deal involving the trade of a nice gray, silver or pearl 2016/2018 Land Cruiser with a black interior.
Mileage: 32k miles
Noteworthy: Stock besides having added running boards and 265/70/18 Michelins. No dents, tears, etc.
Asking Price: $105k
Willing to consider a deal involving the trade of a nice gray, silver or pearl 2016/2018 Land Cruiser with a black interior.
Mileage: 32k miles
Noteworthy: Stock besides having added running boards and 265/70/18 Michelins. No dents, tears, etc.
Would he consider a trade for 2016 Subaru Outback AND my '97 LX450?!
jfz80
Cruisin’
5 - 285/60 18 BFG ko2 in high point
Under 2000 miles. $850
SOLD
Under 2000 miles. $850
SOLD
Last edited:
For sale is the Rigid 20" light bar that I won at GSMTR this year. Installed it on the 60 and decided I wanted a different aesthetic so it's up for grabs. Was installed for 1 day and used my existing harness so the Rigid harness is included and unopened. Includes everything from the box; light bar, harness, fuses, mounting brackets, instructions.
Asking $350. I'm in Durham, NC.
www.rigidindustries.com
Asking $350. I'm in Durham, NC.
RADIANCE+ 20 Inch WHITE BACKLIGHT
The RIGID Radiance Plus LED light bar is the perfect solution for those who want RIGID's legendary quality at a level everyone can attain. RIGID's Radiance Plus bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series, but that is where the visual similarities...
www.rigidindustries.com
Free, central GSO. Outdoor/indoor car cover. Nothing fancy, just something I throw over the 200 series in the driveway. Fits fairly large SUVs as it covered my truck with an ARB front bumper and a Front Runner rack. I bought a new one as this one started to lose its water resistance after pollen season, which also means it has some yellow staining where water collected on it. I bought a new one because I’m lazy and had a great coupon. Runs about $75 to $100 new.
Figured I’d offer it up before it gets trashed on Monday.
Yes, I just wrote that many words for a free, very basic car cover.
Figured I’d offer it up before it gets trashed on Monday.
Yes, I just wrote that many words for a free, very basic car cover.
