Media Official LX570s Picture Thread (13 Viewers)

Photo/Video/Audio threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

IMG_1603.jpg
 
TeCKis300 said:
Awesome flex all around, but that front axle articulation is friggen solid.
Click to expand...
It’s a solid set up, the no front sway bar does wonders, especially with the overall comfort walking over rocks. CVs are still running strong with no evidence of stress or failure. I think I can get another inch out of it with more spacer and uniball upper control arms, as long as the control arms stays off the coil at full droop.

I know it’s not the best idea, but I usually wheel alone and lack the ability to take any good action shots in the hard technical stuff. The only limitation at the moment is not having 37s ;) and the front approach angle is pretty awful.

I’ll stick with the ahc for the next 1-2 years since I still have little kids. Climbing into the truck in H is pretty much impossible for them at this age. If people ran my current set up before hating on AHC they would have a different opinion for sure.

That’s coming from someone who has had a 200 with extended travel kings and a tundra swap…
 
I like the painted stock one.
 
That Sport grille looks really nice! is it hard to install on non-sport or lux trim LX570?
Firewall said:
This is our new to us 2020 LX-570 with the sport package. Previous owner vinyl wrapped the chrome in black, which I really like because to me it leaves the flashiness somewhere between the LC and a normal 570 although there are some spots that need touching up.

We had just gotten into some light off roading with our GX-460 (profile pic) when it was totaled back in April. I tried to love a ’23 2wd Sequoia for a little bit because of the extra room, but really wanted a LC200 or 570 the entire time (I was talking about a land cruiser before the GX was even on the tow truck).

My plans for it aren’t that extreme. Take care of any maintenance, then wheels, tires, and recovery points. I haven’t read up yet on the skid plate situation but I think they’re a good idea on any car so I may add or upgrade those if needed. If I can find a way to do it cleanly, I’ll also put in my Yaesu FTM-400.

View attachment 3369308
Click to expand...
 
sleeoffroad said:
Slee 05-15 LX570 front bumper in stock soon.
Click to expand...

Just a heads up on our labor day special for bumper and winchs combo's, including the LX570 bumper.

sleeoffroad said:
sleeoffroad.com

SLEE- Steel Front Bumper - '08-15 Lexus LX570 - Slee Off Road

Features Mounting brackets and winch frame made from 3/8” and 1/4” steel Mounting brackets attach to vehicle frame with 8 bolts per frame rail – 16 bolts in total Upswept wings for optimum approach angle Recovery points integrated into mounting brackets – pulling loads are in line with frame for...
sleeoffroad.com sleeoffroad.com

View attachment 3404327
Click to expand...

Special Labor Day 2023.jpg
 
You must log in or register to reply here.

Similar threads

CharlieS
Picture request - Rear axle ebrake cable bracket
Replies
5
Views
479
CharlieS
CharlieS
Goodberger
LX570 Build Thread: Rook
2
Replies
21
Views
3K
Goodberger
Goodberger
clevelandLCguy
Obligatory tire thread
Replies
19
Views
2K
clevelandLCguy
clevelandLCguy
T
Ignore this thread. It's pointless.
2
Replies
20
Views
2K
themanwithnoname
T

Users who are viewing this thread

Total: 14 (members: 4, guests: 10)

Share this page

Back
Top Bottom