Did he have the Rigid LEDs in the rear bumper when you saw it?
Official 200 Series Chat and BS Thread
- Thread starter MScruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Markuson
SILVER Star
Yes, but he wasn't sure if he was going to stick with those.
Here's a link to the photos I posted some time back. You can compare it to the state of the bumper in its current form.
SLEE 200 Bumper Photos...!
Considering going with a aftermarket wheel that sits a tad wider than stock. I don't want to go the spacer route. I like the looks of Fuel's one piece Anza. I have a brand new set of BFG 275/70/18. I was hoping they would provide a bit more front stability. Any ideas?
Markuson
SILVER Star
The Fuel Anzas are +20mm offset and will widen the stance very similarly to spacers. If I ever get rid of my Spidertrax, those are likely the wheels I'd choose.
Anybody use a Unichip on their 200 without a supercharger? Any improvements?
Anyone use Fluid Film for undercoating? I have POR but you have to paste it on, this stuff you can spray and go. Thx
What's the deal on ARB Sahara bar pricing? Seems way out of line from previous bumper. It appears to be the same bumper as well. What am I missing? Shipping hasn't gone up and our dollar is strong.
I'm leery of fxxxing with the ECU on anything I want to be and stay 100% reliable but that's just me.
The AutoAnything reviews are entertaining though:
Unichip Performance Chip
"
2013 tundra 0-60 4.8seconds
Reviewed by paul r (KANEOHE, HI) 0"> Reviewed for a 2016 Toyota Sienna — Oct 12, 2015 8:19 PM
Yes No
Installed with Volant cold air intake and throttle body spacer with TRD dual exhaust system.Took me about an hour to instal. The hardest part was going behind fire wall and under the front axle. Took my time to make sure wires were in a safe location and position before connecting the plugs. Right of the bat I could feel the difference and RPM held strong from 3000 to 5000 rpm. Went 0 to 60 mph in under 5 seconds and could hear my engine come a live when gassing. Probably not got for myMPG
"
That's pretty impressive. 0 - 60 in 4.8 seconds with just the CAI (ha), throttle body spacer, and exhaust. Seems legit, just need an underdrive pulley and he'll be in the 3s.
Last edited:
I am not so keen on wider wheels because you are losing sidewall with them. But, nice thing is you have a ton of choices in the 18" size.
I specifically wanted 17x8. So there are only basically only three choices in that size, steel wheels not sold in NA (too heavy anyway), the 17" alloy LC wheel not sold in NA, and the Rock Warriors.
I have not but how has the POR-15 been working for you and how long have you used it for?
I used it on my sliders and skids after ouray last year. Held up great. 2 complaints though is it comes in gloss black vs matte black which is what the sliders are. Also it has flaked off a little but base layer is still intact. No rust showing.
Cool. Just a bit of surface rust on my 200 but I want to keep it that way.
I got mine on Amazon. Be sure to use rubber gloves when handling. You don't want that stuff on your skin...
phishtaco
Cincinnati
For you Rock Warrior fans....Let me know if they won't ship, I might be able to get them for you.
Toyota Tundra wheels
Toyota Tundra wheels
The 13+ has cooled seats which spiked the Sahara bar up for them...
I asked Christo since I am here and he wasn't sure why. They dropped the price a little after reviewing but no good reason for price difference arb set.
Lol! 'Cooled seats'. Nice one. Seems like ARB needs a phone call as to why they are trying to fleece their customers with such a big jump in price.
Anybody ever though about installing the larger 35 gallon gas tank from the tundra into our 200? Just a thought.
They are on the wrong side...
