TurboDennis
SILVER Star
So i found myself in a unique situation. Im finishing up with complete wiring swap on my truck (including dash and front harnesses) to European spec harnesses (long story).
The problem i have is that the euro harness has H4/9003 style plugs on the harness, and is fully set up for using those bulbs from the factory. It actually has same H4-style connectors for both bulbs in the head light, but one has 3 wires (for a dual filament bulb, i assume), and the other has only two. My truck (as all USDM trucks) has 9005 and 9006 bulbs.
So what are my options here? At this point im looking for the simplest solution. Is there an H4 bulb available that can mount in 9005/9006 housing? This would be preferable option. Or is there an adapter that will at least allow me to use the 9005/9006 bulbs and plug them into the front harness? (i dont want to hack up the harness). Or are there any other options (short of trying to find Euro spec headlights).
The problem i have is that the euro harness has H4/9003 style plugs on the harness, and is fully set up for using those bulbs from the factory. It actually has same H4-style connectors for both bulbs in the head light, but one has 3 wires (for a dual filament bulb, i assume), and the other has only two. My truck (as all USDM trucks) has 9005 and 9006 bulbs.
So what are my options here? At this point im looking for the simplest solution. Is there an H4 bulb available that can mount in 9005/9006 housing? This would be preferable option. Or is there an adapter that will at least allow me to use the 9005/9006 bulbs and plug them into the front harness? (i dont want to hack up the harness). Or are there any other options (short of trying to find Euro spec headlights).