My Proclip Phone Mounting Setup (1 Viewer)

[Lono]

Proclip USA Lexus GX Series Left Mount w/ recommended carrier for iPhone 8+.

Left Dash Mount for Lexus GX Series

The ProClip Left Mount attaches on the left side of the steering wheel and the face plate is angled towards the driver for optimal viewing. The mount clips into the dashboard seams between the panel sections, providing a very sturdy and tight fit. Average installation time is 2 minutes. No...

www.proclipusa.com

Dual USB Charger

https://www.amazon.com/gp/aw/d/B07FD2Z6GF?psc=1&ref=ppx_pop_mob_b_asin_title

Rubber USB plug to block light from empty USB port.

Amazon.com: AnFun 20 Pieces Rubber USB A Type Female Anti Dust Cover Protector Plugs Stopper Cover : Cell Phones & Accessories

Amazon.com: AnFun 20 Pieces Rubber USB A Type Female Anti Dust Cover Protector Plugs Stopper Cover : Cell Phones & Accessories

www.amazon.com

Seven inch USB cable

https://www.amazon.com/gp/aw/d/B07KMQLFMP?psc=1&ref=ppx_pop_mob_b_asin_title

Powered with an add-a-circuit

Amazon product ASIN B085MGP931

Comments: So far so good. May switch to a coiled USB cord. The 7” is barely adequate (TWSS). My phone has a case with a credit card compartment that prevents wireless charging, otherwise I may have selected that option. I wasn’t sure how I’d like the phone mounted up high and to the left, but I like it.

 

[xychromosome]

Looks good. I like that usb plug option. How did you power it?

 

[Lono]

Looks good. I like that usb plug option. How did you power it?

I installed an add-a-circuit to fuse box in the DS footwell.

 

[r2m]

Very clean! I like they way you thought out how to supply power to your mount without long wires.
Can you take a couple of pictures pulled back a little to see how it looks more from a drivers view?
IN another post of mine, I took a photo of the switch box on the left side of my steering wheel. I put my phone/camera up to my nose and clicked a couple of pic's. This gave a good representation of my "driver's seat" view.

 

[Ramzizaz]

View attachment 2586408
View attachment 2586409
View attachment 2586410View attachment 2586411Proclip USA Lexus GX Series Left Mount w/ recommended carrier for iPhone 8+.

Left Dash Mount for Lexus GX Series

The ProClip Left Mount attaches on the left side of the steering wheel and the face plate is angled towards the driver for optimal viewing. The mount clips into the dashboard seams between the panel sections, providing a very sturdy and tight fit. Average installation time is 2 minutes. No...

www.proclipusa.com

Dual USB Charger

https://www.amazon.com/gp/aw/d/B07FD2Z6GF?psc=1&ref=ppx_pop_mob_b_asin_title

Rubber USB plug to block light from empty USB port.

Amazon.com: AnFun 20 Pieces Rubber USB A Type Female Anti Dust Cover Protector Plugs Stopper Cover : Cell Phones & Accessories

Amazon.com: AnFun 20 Pieces Rubber USB A Type Female Anti Dust Cover Protector Plugs Stopper Cover : Cell Phones & Accessories

www.amazon.com

Seven inch USB cable

https://www.amazon.com/gp/aw/d/B07KMQLFMP?psc=1&ref=ppx_pop_mob_b_asin_title

Powered with an add-a-circuit

Amazon product ASIN B085MGP931

Comments: So far so good. May switch to a coiled USB cord. The 7” is barely adequate (TWSS). My phone has a case with a credit card compartment that prevents wireless charging, otherwise I may have selected that option. I wasn’t sure how I’d like the phone mounted up high and to the left, but I like it.

Can you please show how the pro clip attaches to the dash?

 

[Lono]

 

[JR1899]

I installed an add-a-circuit to fuse box in the DS footwell.

Which slot did you put the add-a-fuse in? Gonna try and tackle it this weekend. Any pointers?

 

[T0n1cB4ss]

This is awesome! I was looking at doing the same side with proclip but wasn't sure how to run the charging cable. I think I am going to go with the wireless charger. It would be awesome to see a more detailed step by step if you have the time, as I am not that electricaly inclined.

 

[r2m]

I've used this for the past couple of years:
Amazon product ASIN B07RW4DSPH
It has worked great even with my Galaxy Note 20 Ultra with a big 'ol case! Easy one-handed in and out. Wireless, so no plugs. Easy peasy!
Only on the worst washboard roads has it ever bounced out of the stand.

 

[re_guderian]

I'm too scared to block my Life Support vent... I did have a Pro-Clip in my 100 series that partially blocked a vent, and it was just not worth it in the summer time. I finally drilled into the dash. Not sure I'm quite ready for that yet on the 460, though.

 

[folivier]

I agree with re_guderian, I need cold air! I'm using this mount and it just fits on the center console just in front of the shifter.
Amazon product ASIN B08HZ3KW75

 

[BigSwede]

Guys, please ping Padholder to make a GX 460 mount. The more interest they get the more likely they will do it.

 

[prez1967]

Im running a ProClip with Magnetmount on center stack. I dig your idea for left side mounting though... may have to rethink my setup

 

[T0n1cB4ss]

@Lono Which fuse spot did you plug in your add-a-circuit?