Must have CHEAP mods to 100 Series

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

anyone have updates to this list that they'd recommend?

The metal mudflap delete protectors are still a good idea. Maybe a USB plug or a phone holder?
 
Here are a few of my favorite (sub-$100) things:

Blue Sea Systems 4.8 amp USB charger: https://www.amazon.com/gp/product/B01BV1MTAA/?tag=ihco-20

Nite Ize Steelie cell phone mount: https://www.amazon.com/gp/product/B01JJP5JAW/?tag=ihco-20

Reverse LED flush mount lights: Amazon.com: MICTUNING Flood Led Work Light Bar, 2PCS 18W Flush Mount Led Pods Off Road Driving Lights for Jeep Bumper ATV UTV SUV Truck Boat(Single Row): Automotive

Water Wetter: https://www.amazon.com/Red-Line-80204-Water-Wetter/dp/B000CPI5ZK/?tag=ihco-20

Heatshield tubing to protect fuel lines: https://www.amazon.com/gp/product/B000CEO5T6/?tag=ihco-20

Airlift 1000 60728 air bags: https://www.amazon.com/gp/product/B001F15YYA/?tag=ihco-20

1lb of delicious meat sticks: https://www.amazon.com/dp/B003XFZS1K?tag=ihco-20

unBIpA9.jpg


CgtkWpg.jpg


mhcxnSs.jpg


PKM4mSN.jpg
 
Last edited:
Been thinking about getting some LED interior lights, and was eyeing out this set on ebay.


I know everyone talks about Pfran LED's, but has anyone tried these and care to share their experiences?

Just ordered some. Hoping they work out, pretty cheap.
 
Figured I would throw this in there as I have now had a few weeks of usage.
Picked up a set of Lloyd Mat Northridge floor mats a few weeks ago as the ones that came in Alita (Catch-All) were pretty much garbage, would not conform to area, etc. in my mind. At $~65 for front and same for rear (center row) I spent less than $130 with shipping.
Drivers side comes with one hole for mat catch/alignment. (and actually comes with clips)
Untitled by Greg Fisicaro, on Flickr

Passenger side has no holes
Untitled by Greg Fisicaro, on Flickr

Center row
Untitled by Greg Fisicaro, on Flickr

All their "All weather Mats" (I received color samples) come with a deep tooth pattern similar to the desk chair mats you place under your desk chair in an office, so they grip and DO NOT move (something I could not say for the Weather-Tech we have had, nor the Catch-All or the Husky brand I have purchased for others). Even my wife commented on how nice they look (and she hates stuff like this, the plastic all weather mats). The material is decently thick and heavy duty so it will stay in place but not so rigid that it will not unfold. I figured when I got it (which they were all rolled up in a smallish cylinder box) that I would have to lay them out on the concrete and hit them with a heat gun and leave them out for a while so they would unfold. Not so much, they are really plyable.

I have been VERY impressed with these so far and am actually thinking I may purchase a swatch of material from them to fit my FULL rear cargo area (not have the cutouts for the 3rd row anchor points and whatnot).
 
Figured I would throw this in there as I have now had a few weeks of usage.
Picked up a set of Lloyd Mat Northridge floor mats a few weeks ago as the ones that came in Alita (Catch-All) were pretty much garbage, would not conform to area, etc. in my mind. At $~65 for front and same for rear (center row) I spent less than $130 with shipping.
Drivers side comes with one hole for mat catch/alignment. (and actually comes with clips)
Untitled by Greg Fisicaro, on Flickr

Passenger side has no holes
Untitled by Greg Fisicaro, on Flickr

Center row
Untitled by Greg Fisicaro, on Flickr

All their "All weather Mats" (I received color samples) come with a deep tooth pattern similar to the desk chair mats you place under your desk chair in an office, so they grip and DO NOT move (something I could not say for the Weather-Tech we have had, nor the Catch-All or the Husky brand I have purchased for others). Even my wife commented on how nice they look (and she hates stuff like this, the plastic all weather mats). The material is decently thick and heavy duty so it will stay in place but not so rigid that it will not unfold. I figured when I got it (which they were all rolled up in a smallish cylinder box) that I would have to lay them out on the concrete and hit them with a heat gun and leave them out for a while so they would unfold. Not so much, they are really plyable.

I have been VERY impressed with these so far and am actually thinking I may purchase a swatch of material from them to fit my FULL rear cargo area (not have the cutouts for the 3rd row anchor points and whatnot).

Thanks for the report. I have the Lunds and may also switch to these, they look great!

Are those Escape Gear covers on your front seats? Any more pics? Can we get a review? I’m deciding between these and SOR covers. My favorites are Melville & Moon but they told me their 100 series covers won’t fit our USA spec trucks. This was probably two years ago, I’ve been stalling ever since.
 
Sorry to hear of your bad experience- I bought the pfrann kit a couple of weeks ago, and while I haven’t had time to install them they came within 4days.
 
Been thinking about getting some LED interior lights, and was eyeing out this set on ebay.


I know everyone talks about Pfran LED's, but has anyone tried these and care to share their experiences?
Share pics when you install them. Defenitely going to pick these up once I see some feedback!
 
I dont think he is. I sent him money months ago and never got anything, even after emails exchanged.
just assemble your own kit. his kit had the super white light that hurt your eyes and many of them crapped out on me. I assembled my own in the warm white temp. this was the pic he posted when he was active on here. haven't seen him on mud in years.

100-series-led-with-descriptions.jpg
 
Thanks for the report. I have the Lunds and may also switch to these, they look great!

Are those Escape Gear covers on your front seats? Any more pics? Can we get a review? I’m deciding between these and SOR covers. My favorites are Melville & Moon but they told me their 100 series covers won’t fit our USA spec trucks. This was probably two years ago, I’ve been stalling ever since.
They say CARHART on them, they came with the truck so not something I purchased.
 
Did you wire these to a switch or the reverse lights?
I have them set up with an auxiliary switch. They aren't needed all of the time and it's also useful to have them on when hooking up a trailer or some other time when it's not in reverse. Would be easy to have them come on with reverse lights also, or both with reverse and a switch. I have it so that one position is my new reverse lights and in the other position is the reverse lights + zombie lights, but I haven't installed those yet.

I used a Blue Sea Systems switch bezel and a set of switches. All together they may be under $100. I also used a cool waterproof relay and fuse box for my aftermarket stuff.

Blue Sea Systems-
Bezel: Amazon.com: MOUNTING Panel CONTURA 6 POS: Automotive
On-Off-On Switches: Amazon.com : Blue Sea Systems Contura II ON-Off-ON DPDT Switch, Black : Sports & Outdoors
On-Off Switches: Amazon.com : Blue Sea Systems Contura II Off-ON SPST Switch, Black : Sports & Outdoors

Fuse and Relay Box: Amazon.com: 12-Slot Fuse Relay Box 6 Relays 6 ATC/ATO Fuses Holder Block with 41pcs Metallic Pins for Automotive and Marine Engine Bay Jeep Car Boat: Automotive

Dual USB 4.8 amp charger: https://www.amazon.com/gp/product/B01BV1MTAA/?tag=ihco-20
12v and USB switched panel: https://www.amazon.com/gp/product/B07PP1TML3/?tag=ihco-20

L58dMNw.jpg


xkzMHbp.jpg


JDbLZUV.jpg


qwRowWt.jpg
 
Share pics when you install them. Defenitely going to pick these up once I see some feedback!

Sorry no pics but I got the LEDs installed. They're pretty bright and seem well made. Can't really beat the price either.
 
Ordered a Prado 120 steering wheel cover and cheap FM transmitter for $25 total from Aliexpress. I'll attach pictures once they arrive and during install process.
 
Back
Top Bottom