What did the arb skids run ya?
Builds MadToy build
- Thread starter madtoy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
$460 shipped, including zinc plating and powder coating.
Looked at these and wasn't sure they would work with KDSS. Do you know which one you got? These are the number from ARB:
PART NO. : 5421100 - Prado 120/150 & FJ Cruiser
5421110 - Prado 150 5421100 - 2010-12 4Runner (w/o Kinetic)
5421110 - 2010-12 4Runner (with Kinetic)
PART NO. : 5421100 - Prado 120/150 & FJ Cruiser
5421110 - Prado 150 5421100 - 2010-12 4Runner (w/o Kinetic)
5421110 - 2010-12 4Runner (with Kinetic)
- Thread starter
- #44
I got the 2010-12 4Runner with kinetic (5421110). It was a gamble, but since the non KDSS part number was the same for the 120 and 150, I figured the KDSS part number should also work on the 120. It did, except the hardware kit is different. The 120 kit comes with spacers for the front skid, and the 150 kit doesn't. So I had to make my own spacers, and get longer bolts. If it was possible to order the 150 skids, with the 120 hardware, you'd be golden. Otherwise, you'll need to source a few items.
Last edited:
- Thread starter
- #45
Installed the "Andy Mod" this weekend to be able to turn A-TRAC off, for those times where it gets in the way. So simple a caveman can do it 
Do you happen to have a link to a write up that you followed for the mod? When I search it I find several variation.Installed the "Andy Mod" this weekend to be able to turn A-TRAC off, for those times where it gets in the way. So simple a caveman can do it
Thanks Man
- Thread starter
- #47
I followed this one - although you cut the white wire on the GX. Disabling VSC & TRAC - 2001-2002 4Runner with VSC & TRAC Systems - YotaTech Forums
little_joe
SILVER Star
Is it the camera angle, or did the rear lift pull your axle forward closer to the doors? You running the stock control arms?
- Thread starter
- #49
They are closer to the doors just by nature of the arc of the control arms, but the camera angle makes it look like much more than the minuscule amount it really moved. Stock control arms for now.
NMBruce
SILVER Star
Who did you order them from? Looking at getting some in May
- Thread starter
- #51
I got them from Quadratec, but every place I searched had the same exact price. I prefer to buy from Amazon - but then my wife would have seen the purchase, since we share the Amazon prime account......
- Thread starter
- #52
Added some new wheels to get the tires out of the wheel wells a bit.
Level 8 MK6 17x8 -10 offset.
Level 8 MK6 17x8 -10 offset.
Love those rins
- Thread starter
- #54
Did the TPMS delete mod this week. Took all of 15 minutes during lunch. While the instructions out there say to cut the blue wire in the TPMS computer harness, this isn't necessary at all. Just need to tie in a ground wire to the blue wire with a join connector. If I ever want to go back to TPMS, I simply remove the connector.
Looks great! Lots of good ideas here!
- Thread starter
- #56
Next up...
Thems are some nice wheels and winch...
- Thread starter
- #58
Mounted the winch today. Still need to finish the lower bash bar, but waiting on some more metal...
- Thread starter
- #59
Maybe not the best video - but some funny Lexus comments mid way
Added some new wheels to get the tires out of the wheel wells a bit.
What tires are those?
