SteelHunterFJ80
SILVER Star
@lutzI see on your website the tags include HD models. I have a H1FA part time transfer case. Will the 80 series one work for me still? Thanks
Lutz Auto - Speedometer Correction Device (1 Viewer)
- Thread starter Lutz Auto
- Start date
-
- Tags
- calibration speedometer
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hello. Yes I ordered one of these and fitted to my 100 series landcruiser in NZ. Works a treat. Thanks.
1996 FZJ80
I just installed my new Lutz kit last night.
Took about an hour because I had trouble unplugging my original harness due to tar, gravel, and other debris caked on the plug.
I knew my number was 5% so as soon as I had it connected, poked it 10 times, installed the cover, and drove it. Right on the money.
Running Goodyear Duratracs 285/75-16.
It's my DD and I've had years that I drove more miles to deduct for business than my odometer showed, so I needed to correct it. I run about 15K-20K miles per year, so it can add up for deductions.
I zip tied my control box to the fuel lines.
I wrapped all the plugs and open loom with 3M Super 33 black electrical tape, then zip tied the OEM harness to the Lutz harness to keep it all out of harms way.
I used a tiny bit of dielectric grease to keep the plugs lubed and to assist keeping out moisture on the seals.
Took a couple weeks from date of order to receiving it, but that's ok. Part of that was USPS.
Probably one of the simplest mods I've done.
I just installed my new Lutz kit last night.
Took about an hour because I had trouble unplugging my original harness due to tar, gravel, and other debris caked on the plug.
I knew my number was 5% so as soon as I had it connected, poked it 10 times, installed the cover, and drove it. Right on the money.
Running Goodyear Duratracs 285/75-16.
It's my DD and I've had years that I drove more miles to deduct for business than my odometer showed, so I needed to correct it. I run about 15K-20K miles per year, so it can add up for deductions.
I zip tied my control box to the fuel lines.
I wrapped all the plugs and open loom with 3M Super 33 black electrical tape, then zip tied the OEM harness to the Lutz harness to keep it all out of harms way.
I used a tiny bit of dielectric grease to keep the plugs lubed and to assist keeping out moisture on the seals.
Took a couple weeks from date of order to receiving it, but that's ok. Part of that was USPS.
Probably one of the simplest mods I've done.