Lots of Searching but no visor shelf

[chap79]

X2

are these going to have the metal internal frame/mount setup for the center section like the earlier pics you posted?

That's the perfect spot to get the UHF/VHF up and out of the way.

 

[Akella]

Because its been asked, here is a pic of the trans gauge pod painted using the VHT paint I listed. You can see it against the pillar and the handle. The color only looks off because its more reflective then the pillar and handle.

That looks like a very close match. I think you guys with tan interior will be ok with this paint.


Just to stay clear:

I dont take any preorderes yet, as i am still finishing all the little things with the manufacturer. I posted the price just to let you guys know how much it will be for the console.

I will try to get more pictures of sunvisors in next couple of days. As i have been told by producer that OEM visors will work, but they will hang a bit low.

Alternative visors have been found and they sit almost flat with the console. Again, console can take any flat sunvisor.


Metal bracket will be included to mount radio or stereo.

 

[Akella]

Just got notification from Canada Post, that my package with console is out for delivery today. So i should get it today.

Now i am getting overly excited

I will keep you guys posted

 

[FJRanger]

I like this, what a great place for a 2meter or whatever one prefers.

That looks like a very close match. I think you guys with tan interior will be ok with this paint.


Just to stay clear:

Metal bracket will be included to mount radio or stereo.

 

[Akella]

Got the shelfs in. I am very impressed with quality.

I am moving into new place and it is just disaster; plus we just got dumped with snow, so i will try to install shelf some time next week.

I will keep you guys posted.

 

[thatcabledude]

Sweet! I'm chomping at the bit now!

 

[swamp-thing]

yes please. 96. hard ceiling

 

[Kajun]

so i will try to install shelf some time next week.

I will keep you guys posted.

Thx.
When you do, please snap a few pics of mounting/attachment points in the part, headliner , etc. You know, the usual install details.

Anxious to see the results in order to determine if I'll be shuffling my spring mod purchases to include one of these.

 

[ebbs15]

WOW.... I'm in!

can you show how these are mounted?

 

[mandinga]

Also could you take one picture or just measure how far it hangs down in front of your head sitting in the 80.

 

[Dutchy]

I am in for one soft ceiling grey!

 

[Akella]

One word WOW...

I just installed console/shelfs and i have to say it should have been OEM option.

I am 5'11'' - 6' tall depending on time of day and i dont see any issues with visibility. I will ask my friend who is 6'2" on his opinion later this week.

My visibility upper border was 3/4 down by windshield from the upper edge of the windshield(not a drop from the ceiling) with console on and 1 1/2 with oem visors attached. I hope it makes sense



Pictures of the parts:

Central part is about 10 1/4 x 10 1/4 and 3 3/4 tall at front and 1 3/4 at rear.

Now i need to figure out what i want to install there CB, HAM, second stereo or create something new


3 pieces are easily bolted together.

Bracket:

Installed:

Sun Visor:

I am going with non oem visors on it. I should get them with the next shipment of consoles

Shelfs are very well designed and heavy duty. It wont have problem to hold few heavy books, but i wont drive with them there for safety reason.


I will have first test drive this evening.

Enjoy!

 

[neal0124]

So when do I send you my money?

 

[ironhippy]

Yes!! This is excellent!! TAKE MY MONEY!!

 

[BCR4619]

Do you have any friends that are 6'8".... If not I don't know if this will work

 

[1973Guppie]

this is very cool, put me on the list!, so in that middle section one could install a cb, switches, etc? I guess you could run the wires under the headliner and down the drivers side pillar?

will the production units be grey like this one? also, is the whole thing plastic? what is that center section made out of? will it hold up to having several cuts made into it? Most likely I would like to mount a cb, switch panel and a couple seat heater switches in there.

 

[Wheelingnoob]

I'm still in with visors, waiting to install my HAM on this.

Christian you can test it out in mine if you want first to see how your view is.

 

[busmup808]

So is that the JDM visors?

Sent from my hawn finga using IH8MUD

 

[BCR4619]

I'm still in with visors, waiting to install my HAM on this.

Christian you can test it out in mine if you want first to see how your view is.

Might have to do this then, thanks! Really hoping this works out for us tall folk, should add quite a few more orders to the pile.

 

[Dazrin]

Very cool, but it looks like I need to give up on the idea of a Cobra 29 fitting in there. Oh well. That just pushes it down the priority list.