What are the best recent options for lifting / leveling a 200 series? Is it similar to a 100 series? Also, what tire size is optimal running stock rims?
Lifting / Leveling (1 Viewer)
- Thread starter JDWCruiserMS
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Define "best"...
And "optimal"...
And "optimal"...
- Thread starter
- #3
Im thinking about 1”-2” kit. Want to run an arb bumper. Can I do that by cranking torsion bars? Also, what size tires are y’all running with your lift?
@JDWCruiserMS 200 has different suspension than 100 series. Coil set up in the front. Call 49 Tire in Richland MS. @wct49 will treat you right.
CharlieS
GOLD Star
No torsion bars. Springs and shocks on all four corners. Front are coil over.
If you do a search
(upper right hand corner)
or even better a site filtered search using Google,
you can find all kinds of options from OME Nitrocharger to Kings and everything in between (Bilstein, IronMan, Dobinsons, Tough Dog, OME BP51, Icons).
Each one has it's fans and critics. A lot depends upon what you want to use the vehicle for.
You don't want it level, by the way, you want some rake, rear higher than the front.
Good luck!
If you do a search
or even better a site filtered search using Google,
you can find all kinds of options from OME Nitrocharger to Kings and everything in between (Bilstein, IronMan, Dobinsons, Tough Dog, OME BP51, Icons).
Each one has it's fans and critics. A lot depends upon what you want to use the vehicle for.
You don't want it level, by the way, you want some rake, rear higher than the front.
Good luck!
