Lexus 1uzfe (4.0V8) swap?

[Tapage]

ooohhh lord .. Christo are you swaping a 2UZ onto a 60 series .. ?

I got the electric diagram for a tundra with a 2UZ let me know if you need 'em ..

Which are the selected tranny for this swap .. ?

I'm in the middle of nowhere with the whirring harness .. ( that I got complete from the Tundra donnor )

 

[sleeoffroad]

Tundra Motor, 100 series tranny and transfercase and a whole mess of different harnesses.

 

[Tapage]

Tundra Motor, 100 series tranny and transfercase and a whole mess of different harnesses.

A343 .. ?

Did you already identify the signals that you need to start the 2UZ .. ?

 

[sleeoffroad]

A343 .. ?

Did you already identify the signals that you need to start the 2UZ .. ?

Working on it. Will probably start it tomorrow. Waiting for fuel tank to come back from the cleaner.

 

[Mike Shull]

there is no chance to match the 2UZ with the H55F using Toyota parts .. H55F it's a older ( nice ) tranny ..

EPC

Electronic Parts Catalog .. software that Toyota use search around here and you will found plenty of info and a link to a free EPC on the web ..

Good Info..I'll see if CRS or Dellow can make an adapter...
Thanks for the help with EPC...yep..I need to get that right away

Slee...haven't seen you guys since 12th street closed in Jamestown...Used to be a local...nice project....did you find what you were looking for in the marmet's nest?

 

[Mike Shull]

there is no chance to match the 2UZ with the H55F using Toyota parts .. H55F it's a older ( nice ) tranny ..
quote]

Take a look at an email I got back from Dellow Auto in Auz...
I write ".. > conversion_reqd: 2UZ-FE to H55F ...I hope to be able to get the engine from a Tundra here in the states...
> comments: Thank you for the help."

They write "Mike, Please find attachment. Regards Dellow Auto"

Attachment: TOYOTA V8 LEXUS INTO TOYOTA LANDCRUSIER 6 SIX CYLINDER PETROL OR DIESEL 4 OR 5 SPEED BETWEEN 1974-89 ​

( this kit will not fit the 4 Cylinder diesel motor)​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

 

[Mike Shull]

Now take a look at this email from Bullet:
Greg writes "Hi MikeThe 1UZ and the 2UZ have the same pattern. Have never done a H55F trans to 1UZFE so don't know what you will need. Regards Greg Markham"

what do you all think of that?...I was almost sure that they were differant...