LFD2037
TEXAS LEXUS!
Let's see some pic's of those mounted UnderDawgs bumpers & racks!!!!! I'd like to see some in action. Carry loads, bashing rocks, blazing thru the great US of A. Let's see 'em!
Let's See Those UnderDawg Bumper/Rack Pic's!
- Thread starter LFD2037
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Truck is dirty... 
Nothing loaded up on it yet.... waiting for my wallet to stop smoking for the holiday shopping season before I buy a RTT
Nothing loaded up on it yet.... waiting for my wallet to stop smoking for the holiday shopping season before I buy a RTT
SUMMIT CRUISERS
SILVER Star
Detroit, make sure to take good measurements for a RTT. That upper tube may make it difficult to fit one. The Cascadia Vehicle tent my son has sits from the back of the sunroof to about 6" or so from the end of the truck. I believe it is 54" to 56" from front to back with the floor being 48" (side to side) and 96" folded out. You should be alright if the upper tube extends to the end of the sunroof or a bit more.
Well I can post my rusted up rack. Jasons powdercoating sucks. I paid for it and its very thin and Ive never seen something rust so fast, plus when I received the rack it looked like it was assembled on saw horses, both tubes front to rear have a bow in them, looks like crap.
While it may be deserved on some notes, he is no longer a vendor? right? And no longer making racks or bumpers? correct? And this isn't tech? And a lot of the info was already in another thread here? no?
Not the place for ex-vendor-bashing IMHO.
Not the place for ex-vendor-bashing IMHO.
- Joined
- Jun 21, 2011
- Threads
- 234
- Messages
- 21,836
- Location
- Redding, California
- Website
- trail-tailor.com
LFD2037
TEXAS LEXUS!
- Thread starter
- #10
I forgot I started this read!!!! I did it back in November right as I got the feeling I was getting screwed. Well, I was right all the way back then!!! I started it as bull**** to see if ANYONE had actually got what they paid for/were promised. Nope.
Last edited:
Wow, that blows! I was drunk when I built my rack and rattle canned it, and it doesn't look quite that bad!
maxamillion2345
Franken-80
I don't see the problem.
Guy has a rack, posts pictures in the picture thread. Gives a brief description.
It's not tech unless it's about cup holders!
Here are the end of the wings on mine. Ordered for a flared and as you can see received flareless. I don't have any full view shots as I took these to show Jason he sent the wrong wings.
![20150106_203934[1].webp](https://forum.ih8mud.com/data/attachments/847/847743-d120c9042951eb46e9ce6e1d16be6348.jpg?hash=MARkJxeiNi "20150106_203934[1].webp")
![20150106_204155[1].webp](https://forum.ih8mud.com/data/attachments/847/847744-65f22e2d3f596104636fee9d72c4933b.jpg?hash=QISLqO9Xkl "20150106_204155[1].webp")
Tech: I did have to ream one of the bolt holes on the passenger wing a little bit to get it to line up.
Tech: I did have to ream one of the bolt holes on the passenger wing a little bit to get it to line up.
NLXTACY
Wits' End
not bashing, but those rack welds are cold 
not bashing, but those rack welds are cold
That's what jumped out at me as well...
not bashing, but those rack welds are cold
Is it me or the seam between the tube and mounting plate is NOT welded? Shouldn't that be welded? It looks like it's tacked together at 4 corners and not fully welded as I think it should be.
He was in a hurry for his next design.
- Joined
- Jun 21, 2011
- Threads
- 234
- Messages
- 21,836
- Location
- Redding, California
- Website
- trail-tailor.com
Next VICTIM... Sorry I had to....
