KZJ78/1KZ-TE AC Compressor and or AC Clutch (1 Viewer)

[Sawtoothbiker]

I’m looking for an AC clutch for my 1994 Prado with a one KZTE or I would take a whole compressor with a new clutch preferred just a clutch anybody have any ideas on where to source one of these? I’ve heard rumors there are some US domestic versions that will work from a forerunner, thanks Knute

 

[Sawtoothbiker]

I’m looking for an AC clutch for my 1994 Prado with a one KZTE or I would take a whole compressor with a new clutch preferred just a clutch anybody have any ideas on where to source one of these? I’ve heard rumors there are some US domestic versions that will work from a forerunner, thanks Knute

It’s a DENSO 447-200

 

[BushyBrow]

For the clutch you can get this Toyota 88410-22480 (8841022480) CLUTCH ASSY, MAGNET - https://www.amayama.com/en/part/toyota/8841022480 but this is available at a US Toyota shop.

The compressor is a whole different thing and I sourced it from Japan4x4 per suggestion from @OGBeno

R12: 88320-35H91
R134: 88320-35H92

Japan4x4 was great to work with but note the compressor is pricey.

I have a '94 KZJ78 - you can find my traumatic journey here: A/C not blowing cold, but clutch is engaged - https://forum.ih8mud.com/threads/a-c-not-blowing-cold-but-clutch-is-engaged.1315541/#post-15105569

 

[Sawtoothbiker]

For the clutch you can get this Toyota 88410-22480 (8841022480) CLUTCH ASSY, MAGNET - https://www.amayama.com/en/part/toyota/8841022480 but this is available at a US Toyota shop.

The compressor is a whole different thing and I sourced it from Japan4x4 per suggestion from @OGBeno

R12: 88320-35H91
R134: 88320-35H92

Japan4x4 was great to work with but note the compressor is pricey.

I have a '94 KZJ78 - you can find my traumatic journey here: A/C not blowing cold, but clutch is engaged - https://forum.ih8mud.com/threads/a-c-not-blowing-cold-but-clutch-is-engaged.1315541/#post-15105569

 

[Sawtoothbiker]

Thank you very much that was very helpful. I was able to find that clutch at online auto parts for $129 plus shipping great price I’ll see if I can work on the compressor later but thank you very much!

 

[Sawtoothbiker]

So I got the clutch and removed the old one and found a previously damaged compressor snout so what I really need is the compressor

 

[OGBeno]

Order one up from Dave Stedman at Japan4x4.

Easy peasy.

 

[BushyBrow]

Ah yeah, exact same thing happened to me and the exact same (solid) advice from OGBeno

 

[Sawtoothbiker]

Order one up from Dave Stedman at Japan4x4.

Easy peasy.

Thank you I sent Dave an email

 

[Zorlac]

for engines (1FZ and 1KZ) uses the same compressor