Knock Sensor Connector PN? (1 Viewer)

[incudie]

Hey All,

I had to replace my knock sensors recently and unfortunately, the locking mechanisms on the female connector, broke.

I'm finding a ton of info on connectors for 80s but not 100. Does anyone know where to find a replacement connector?

Hoping to find something like this but for the 100s.

Here's the connector I'm talking about. I'd prefer to not JB weld it in place =/

Napa and Oriellys seem to have it but both are out of stock on their websites.

Thanks!

 

[awesomeissquid]

I would recommend giving this thread a read. If my notes are correct there is a replacement connector housing (the grey piece in your picture) PN# 90980-11166 and the repair terminal which is a short section of wiring and the pin PN# 82998-12440. If your wiring is okay, you can likely just release the wire and pin from the existing connector housing and swap it into the new connector housing.

Knock sensor wire cut, what do I do HELP - https://forum.ih8mud.com/threads/knock-sensor-wire-cut-what-do-i-do-help.913735/

 

[incudie]

Thanks! I had literally just come across the same thread and saw those part numbers.