J-Robs truck saga (1 Viewer)
- Thread starter Bodean
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What's the status?
Pics or it didn't happen
Bodean
Hot Damn
- Thread starter
- #1,426
I guess I can update the status as I understand it: Links are done and tight, brake calipers and rotors are done, brake lines are run and almost done (had trouble bleeding the rear), ARB lines are run and hooked up, axle vent lines are run, battery box is fabbed and painted, knuckles are built and RCV's are installed in the front, Rear axle shafts will be here this week. Had to send several springs back to King to swap for a different spring rate. Radiator and fan shroud are almost ready to go back in for good. Front end body parts need to go back on and exhaust will need to be run after it's all done. Still a bunch of small stuff to do.
Hope to see this thing run by Labor Day weekend!
Hope to see this thing run by Labor Day weekend!
Spent a little time in the shop tonight.
Damn good thing I went over there. Those dip s***s can't figure nuthin out.....
Amazing work going on over there. Amazing.
Damn good thing I went over there. Those dip s***s can't figure nuthin out.....
Amazing work going on over there. Amazing.
That shirt is PIMP.
I coined it.
I coined "RockBouncer" too but I aint got s***.
Great job JRob and crew
I coined it.
I coined "RockBouncer" too but I aint got s***.
Great job JRob and crew
jrob
Florence, MS
Figured it's about time for an update
full hydro ram installed and plumbed
brake, axle vent, and arb lines routed from axle to the front upper link
knuckles built and connected to ram
jrob
Florence, MS
winch and hoop reinstalled. power steering cooler right behind the bid. top of shock hoops with mounts for shock reservoirs
crossmember between shock hoops with reservoir mounts. that is a power steering line running across the crossmember. New 4 core radiator and fan shroud. Power steering reservoir.
crossmember between shock hoops with reservoir mounts. that is a power steering line running across the crossmember. New 4 core radiator and fan shroud. Power steering reservoir.
jrob
Florence, MS
we could not get the brakes bled at first (I have never had good brakes), we changed out the booster and presto! New master cylinder for the 80 axles.
plumbing at the steering orbital
rear shock reservoir mount and shock hoop and mount
plumbing at the steering orbital
rear shock reservoir mount and shock hoop and mount
jrob
Florence, MS
new springs installed 200/250 in the front and 150/200 in the rear. sitting real close to ride height; however, they will need to adjusted more once the truck is fully back together. shock reservoirs are mounted
jrob
Florence, MS
here are a few pics of the exhaust and front drive shaft
jrob
Florence, MS
Tomorrow I'll be finishing up the rear exhaust and working on finishing up any loose ends. Hopefully Monday we will be able to fire her up!
If anyone is free tomorrow...come on down!
If anyone is free tomorrow...come on down!
First it's Dan Hull ...now Jrob and his boyz.... Im feeling totally inferior over here. Amazing work guys!
Awesomeness!!! Looks amazing. Nice work guys.
Is that a forklift? Going to do some flexing....
Is that a forklift? Going to do some flexing....
Amazing.
Greatness
Bomar
SILVER Star
This is damn near a real life transformer through the past years
