Intro - new FZJ80 owner in Raleigh - and build?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Can't believe I've had the beast over a year now. Lots of little fixes here and there on top of replacing a bunch of exhaust gaskets that drastically improved idle, new brakes, new brake lines after finding a hose on the verge of bursting, and rebuilding the calipers.

IMG_20190812_125618.webp


Finally realized why the truck was so slow. The parking brake was always on even when the ebrake handle was down so rebuilt the parking brake. The truck has a little pep now.

Found problems like a crack in the TC from some knucklehead over tightening the fill bolt and then hiding it with some sort of rubber compound. Now it leaks all the time.

IMG_20200209_123723.webp


Rebuilt the front driveshaft and found the vibration problem was probably due it being out of phase by two teeth. Nice and painted now...

IMG_20200208_185017.webp


I put a couple trips to Uwharrie under my belt...
IMG_20191109_104027.webp


And that gave me the bug to finally do some upgrades...
IMG_20200129_105052_199.webp



Next up is a 3" lift. I think I'm going with the Icon set up and Delta radius arms. Hopefully, work travel will slow down enough so I can finish the install before the Relic Run.
 

Users who are viewing this thread

Back
Top Bottom