Inti rack possibility!
- Thread starter marcovgv
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I mounted my rack last weekend, I was part of order #2 a while back. Juan managed to come through just fine, shipping was amazingly fast my rack arrived in Sumas at Ship Happens (Washington State, at the Canadian border) in about 5 days from leaving Caracas. No pictures yet, but the silver and gold coloured plated hardware goes well with my black LX450's gold logos and silver OEM wheels!
If you're in Canada like Gord then don't hesitate to have one shipped up to the border for pickup. I didn't ship to Canada but there is no hassle shipping to the US and bringing them into Canada, I paid the usual taxes on mine (12% HST).
The six legs are ample strong to support a RTT, there is no issue with strength on this rack, it is well designed for sure and 8 legs would be overkill. After I assembled mine I stood on the rack and shook it side to side, the only give was in my soggy tired stock suspension (soon to be addressed).
Some are under the assumption that the side rails fold down to accommodate a RTT, this really isn't the case, they fold down, I'm assuming, to allow you to load the rack more easily from the side.
The sides can be removed but you would then have to take the light bar off as it is retained by the forward most thumb screw of the side rails. Removing the sides without taking the light bar off would leave it hanging on two forward tabs; the light bar is not strong enough to be left like this, it would flop about. It would be nice to have the side rails removable up to the raised "jerry can" section, that way you could probably mount a RTT and have the light bar and "jerry can" section still attached. If one were so inclined this could be fabbed up to work this way.
Assembly went well, some of the drilled holes etc. are a little off centre, but then again these are hand built, drilled, assembled and taken apart again, so everything lines up for the most part. I only had one hole that did not line up at a corner bracket rivet hole, I just chased it out with a drill and it went together fine.
I haven't measured the overall dimensions, but the rack sits quite tight to the roof, roughly 3/4" to the centre of the roof at its tightest. Taller brackets are available so that you can clear an OEM roof rack if you don't feel like removing it, but it must look strange.
Overall I'm super happy with my INTI, I waited a long time to get one and I'm glad I finally managed to, I didn't think that I would ever be able to lay my hands on one after La Cabra stopped bringing them in.
Gord if you are thinking of ordering one and want to check mine out you before you do, you are welcome to do so. I'm in Abbotsford, just PM me.
Russ
If you're in Canada like Gord then don't hesitate to have one shipped up to the border for pickup. I didn't ship to Canada but there is no hassle shipping to the US and bringing them into Canada, I paid the usual taxes on mine (12% HST).
The six legs are ample strong to support a RTT, there is no issue with strength on this rack, it is well designed for sure and 8 legs would be overkill. After I assembled mine I stood on the rack and shook it side to side, the only give was in my soggy tired stock suspension (soon to be addressed).
Some are under the assumption that the side rails fold down to accommodate a RTT, this really isn't the case, they fold down, I'm assuming, to allow you to load the rack more easily from the side.
The sides can be removed but you would then have to take the light bar off as it is retained by the forward most thumb screw of the side rails. Removing the sides without taking the light bar off would leave it hanging on two forward tabs; the light bar is not strong enough to be left like this, it would flop about. It would be nice to have the side rails removable up to the raised "jerry can" section, that way you could probably mount a RTT and have the light bar and "jerry can" section still attached. If one were so inclined this could be fabbed up to work this way.
Assembly went well, some of the drilled holes etc. are a little off centre, but then again these are hand built, drilled, assembled and taken apart again, so everything lines up for the most part. I only had one hole that did not line up at a corner bracket rivet hole, I just chased it out with a drill and it went together fine.
I haven't measured the overall dimensions, but the rack sits quite tight to the roof, roughly 3/4" to the centre of the roof at its tightest. Taller brackets are available so that you can clear an OEM roof rack if you don't feel like removing it, but it must look strange.
Overall I'm super happy with my INTI, I waited a long time to get one and I'm glad I finally managed to, I didn't think that I would ever be able to lay my hands on one after La Cabra stopped bringing them in.
Gord if you are thinking of ordering one and want to check mine out you before you do, you are welcome to do so. I'm in Abbotsford, just PM me.
Russ
The rack for Fj60 is larger: 2 meters long, therefore the box is bigger and heavier. the rack for FJ60 is $ 1420
New thread "Show us your 80 Inti Rack Mods and Addons"
I started a new thread for posting what you've done with your new Inti Rack: Show us your 80 Inti Rack Mods and Addons
I started a new thread for posting what you've done with your new Inti Rack: Show us your 80 Inti Rack Mods and Addons
Thanks to you and your cousin for all your hard work in making these available again.
4th Order ready!!!!!!!
This will be the last Order of 2010, we are looking forward to deliver it on the last week of Dec 2010 or first week of Jan 2011. There are 6 spots and 5 of them are available. We will close this 4th Order the latest Wed 25, 2010 (with or without all spots covered). We want to accomplish our deadlines.
Who is in????
This will be the last Order of 2010, we are looking forward to deliver it on the last week of Dec 2010 or first week of Jan 2011. There are 6 spots and 5 of them are available. We will close this 4th Order the latest Wed 25, 2010 (with or without all spots covered). We want to accomplish our deadlines.
Who is in????
Last edited:
Credit card accepted
Who would like to pay in Credit Card?
Let me know to see if we ask for the Terminal.
Who would like to pay in Credit Card?
Let me know to see if we ask for the Terminal.
Inti 3rd order delivery
Lowell:
The 3rd Order was closed 10/29/10 and it takes aprox a month to make them, we are doing our best to finish this order for next week and deliver it. As soon as I have more precise info I'll update you.
Thanks again for your business.
Lowell:
The 3rd Order was closed 10/29/10 and it takes aprox a month to make them, we are doing our best to finish this order for next week and deliver it. As soon as I have more precise info I'll update you.
Thanks again for your business.
Count me in for order four. zip: 83619
SWEET JESUS! Do I ALWAYS log in a few days after these close?!?!?
Count me in for #4 please,.. Zip is: 22405.
Thanks! Ill try and login more often... really looking forward to getting in on this at some point.
have a great day all.
Bill
TLCA#7390
Count me in for #4 please,.. Zip is: 22405.
Thanks! Ill try and login more often... really looking forward to getting in on this at some point.
have a great day all.
Bill
TLCA#7390
4th ORDER CLOSED!!!!
Hi to all:
The 4th Order is closed, next opening order will be next year Jan 10 aprox.
Soon selling other products!!!!
Regards
Juan Carlos Lizarralde
jc@payaraexpeditions.com
Hi to all:
The 4th Order is closed, next opening order will be next year Jan 10 aprox.
Soon selling other products!!!!
Regards
Juan Carlos Lizarralde
jc@payaraexpeditions.com
I didn't go trough all the pages, but by any chance can they make and quote me with a rack for a 40 series (fibergalss gutter mount)!. Also Do they still make collapsable rail sides to make them 100% flat?
Do they ship them individually once they get to the US?
Any extra discount for being a Venezuelan citizen? lol !
Daniel
Do they ship them individually once they get to the US?
Any extra discount for being a Venezuelan citizen? lol !
Daniel
Subscribed.
DELAY IN 3RD ORDER. please read persons involved
I would like to apologize for the delays in this order, but is something that we can not control (NATURE). Venezuela is in a really bad situation because of the non stopping rains in all the country. This has produced a delay in the manufacturing process of the racks; most of INTI workers have been affected by this rains: (loosing their homes, difficulties to get to work, flooded streets ,etc). I spoke with INTI today 12/06/10 and they told me that the racks will be ready by the end of this week; therefore, we will be packaging the racks during the weekend to be able to deliver next week.
The persons involved in this 3rd Delivery please resend your info:
- Complete Name
- Complete Address
- Email
- Contact Number
Once again, thanks for your business and sorry for the delay.
Regards,
Juan Carlos Lizarralde
(954) 529-8077
I would like to apologize for the delays in this order, but is something that we can not control (NATURE). Venezuela is in a really bad situation because of the non stopping rains in all the country. This has produced a delay in the manufacturing process of the racks; most of INTI workers have been affected by this rains: (loosing their homes, difficulties to get to work, flooded streets ,etc). I spoke with INTI today 12/06/10 and they told me that the racks will be ready by the end of this week; therefore, we will be packaging the racks during the weekend to be able to deliver next week.
The persons involved in this 3rd Delivery please resend your info:
- Complete Name
- Complete Address
- Contact Number
Once again, thanks for your business and sorry for the delay.
Regards,
Juan Carlos Lizarralde
(954) 529-8077
One rack available for this delivery!!!
Hi to all:
We have one extra rack (Serie 80) in this Order..... We should have them for delivery this coming week 12-13-10 / 12-19-10.
If some wants it, this is the perfect moment to get it with out waiting for the manufacturing time.
PLEASE do not deposit until I agree with you, I don't want double deposits (there is only ONE available without owner)
Regards,
Juan Carlos Lizarralde
(954) 529-8077
Hi to all:
We have one extra rack (Serie 80) in this Order..... We should have them for delivery this coming week 12-13-10 / 12-19-10.
If some wants it, this is the perfect moment to get it with out waiting for the manufacturing time.
PLEASE do not deposit until I agree with you, I don't want double deposits (there is only ONE available without owner)
Regards,
Juan Carlos Lizarralde
(954) 529-8077
So where are we on this 3rd order? They in your hands yet? Looks like these will end up as Christmas gifts to our selves.
Price?