I am trying to get an ignitor/coil assembly from a '76 FJ-40, to work with my dizzy on a '84 2F. The dizzy is original to the engine, and the ignitor assy. came from plaiii, as a working used assy. The ignitor assy. has a solid black wire with a 1/8" round male plug on it, a red wire with a female spade connector. I have connected my BW wire on my vehicle from starter to +post on coil, and BY wire to ballast resistor. the otherside of ballast resistor goes to the positive post of coil. My dizzy has two wires, red & white. I connected the red from ignitor to red of dizzy, the black of ignitor to ground. OK.....heres the main ?. What do I connect the white of the dizzy to? There are no more wires from ignitor assy. Also there is a resitor block mounted to the side of coil assy. that has four wires going to it from ignitor. I know this is complicated, but I'm unable to find any schematics of the assy containing this set of resistors. Also, the wires going directly into the ignitor are, black, green, pink(brown?), white, and blue. All items are stamped toyota, so there are no aftermarket parts here. Any idea's?
Douglas
Douglas