Hiluxforever
SILVER Star
I have a couple of 12v drills. My Bosch has a pretty decent clutch that can adjust down for sensitive applications.Something like this:
View attachment 3067212
Not very powerful because you are drilling into plastic. You will want to avoid hand tightening; 500 fasteners per kit and barely any nuts/washers, all screws. You want to use this to get most of the way as mine isnt that powerful, then hand tighten home stretch.
You can also use your power drill, set to lowest torque. Even then slow down near the end and hand tighten the home stretch. This is my preferred way when doing multiple kits, but i have stripped a few parts during the learning process with the full-size drill. If you end up stripping a part, it's okay; just go up a little in thread size or go longer screw with M2/M3 nut on other end.
There is the option of having me assemble both for you as well. The option to build your own is for those who love to tinker; and for you guys I recommend PETG or PLA+ only for now, as they are much more forgiving and do not snap or crack nearly as early when drilled into/upon impact. Just feed me coffee and ill be more than happy to assemble extra kits.
I sent an additional $150 so I could have 2 full electronic sets for 2 vehicles and one set of spares.And since i only budgeted for 1 set of electronics, if you want your extra kits to also be fully ready to run and want to take advantage of the current group discount, you have 2 options:
1. Share controller and battery between your 2 kits: Add $50 for motor, Receiver, ESC, Tires, Shocks, Fasteners, Bearings.
2. If you want every kit to have their own battery and controllers: $100 per kit. This includes ~10 day ship from china.
And i accept personal donations in the form of coffee and things that help this project; like filament and machines!
Last edited: