Help with SRS warning light clearance procedure - 2007 Land Cruiser (5 Viewers)

[Mudeater08]

Ahoy mudders,

I've been troubleshooting a SRS warning light issue on my 2007 Land Cruiser utilizing the procedure outlined by Cosmo Kramer in this post:
Air Bag Light, Diagnosis and Repair - write up - https://forum.ih8mud.com/threads/air-bag-light-diagnosis-and-repair-write-up.1267640/

I've been able to pull the codes without any issues (14, 18, and 25), but I'm having an issue clearing the codes as recommended in the post.

The service manual procedure calls for clearing the codes with the Tc and AB terminals, but my car does not have an AB terminal in the connector...

Does anyone know if the procedure to clear the SRS warning light is different for the 2007 model year?

I've had my Land Cruiser for a little over a year now and it has the mildest of modifications: springs, struts, BT adapter, rock sliders, wheels, etc. The guy I bought it from had 3 100 series cars total, loved them all, and really knew his s***. Most of the receipts I was given when I bought the car were from a Toyota dealer and I have no reason to believe he did any wild modifications.

Thanks in advance for any input!

 

[excessive]

do you have Techstream ?

 

[Mudeater08]

No, but I'm reading about it now. Do you have a preferred application and OBD II application? I'm guessing this is my best bet, given the issues with my DTC.

Sorry for the delayed response, btw. Work, kids, life, etc.

 

[Malleus]

Techstream

 

[Mudeater08]

Thanks. I'm reading through the How-To: TechStream In 5 Minutes thread.

If anyone else with a 2007 can chime in, I'm still interested to know if they have an AB terminal in their DTC connector.