Help identifying an oem steel wheel (1 Viewer)

[bcw495]

Hoping someone can point me to a part number for a 16x8 oem steel wheel.

Photo below on a 105 but I believe the wheel is a 70 series part. Any help is appreciated!

 

[OGBeno]

Two options in US from Toyota:

42601-60262-03 Direct fit

42601-60362 needs 3/4-1” spacers.

 

[rick_d]

Do you need 5 lug or 6 lug? 105 shown is 5 lug

 

[sark]

@bcw495 Has a 5-lug 100 series: The MUD 100 series Photos thread - https://forum.ih8mud.com/threads/the-mud-100-series-photos-thread.91953/post-15329361

@OGBeno's options are the 6-lugs that 70-series owners use. Anything like them in 5-lug Beno?

 

[sark]

I think you're looking for: 42611-60200

I believe these are for 105 series specifically, so the offset or width could be incorrect/different for a 100 IFS

 

[OGBeno]

My bad. Missed the 5-lug part. Correct. Mine are for 6-lug trucks.

 

[cruiserdan]

42611-60200 is the 105 wheel. There has never been a 16x8 wheel factory-fitted to any 7x Series variant.
The bolt pattern is the same as the later 7x 5 lug hubs but the offset is different.

 

[bcw495]

I think you're looking for: 42611-60200

I believe these are for 105 series specifically, so the offset or width could be incorrect/different for a 100 IFS

Those are the ones, thank you! Spent quite a bit of time trying to dig those up.

 

[bcw495]

42611-60200 is the 105 wheel. There has never been a 16x8 wheel factory-fitted to any 7x Series variant.
The bolt pattern is the same as the later 7x 5 lug hubs but the offset is different.

Yes it looks like the 105 has a narrower rear axle width than the 100 and the offset on these wheels is likely 0mm. Thank you for the help.