headers? (3 Viewers)

[donnie12]

i have a 94 toyota pickup 350 swap and im having no luck finding headers any one know were i can find some that will fit

 

[brokenparts]

block huggers or factory ram horns... try summit or jegs or ebay.

 

[GarageRat]

Speedway and Rock Auto both have the corvette 2 1/2" manifolds for 55ish a piece.

 

[camcruiser13]

ramshorns are your best bet, cheap too

 

[cody c]

Ram Horns!

 

[chicago]

Wish I could have done the ram horns!!!

 

[Poser]

Wish I could have done the ram horns!!!

What was your issue?

 

[Gumby]

I have Hookers on my pig and hate them. They loosen up and leak frequently and the high end power is useless on a wheeling rig.

 

[camcruiser13]

it seems like alot of headers leaks, i had them and tightened all the time

 

[chicago]

What was your issue?

None yet. Just that the ram horn block huggers would have allowed for more space at the frame rails.
The AA center dump headers are TIGHT at the rails, especially the PS.

 

[atl zj]

I have the hooker ls1 blockhuggers on my 6.0l and they leaked... only until I added stage 8 collector bolts and copper gaskets. Now they're great.

 

[etrnlbzz]

If your running an LS V8, the stock LS6 corvette manifolds are really good. Even with the heat shields in place my steering shaft clears.

 

[lehiguy]

I bought a set of shorty, block huggers on Ebay and they have been working great for years. No complaints here.