Anyone happen to have a link to a wiring diagram for the GX470? Specifically, trying to find the pin out/wire colors for the dash cluster. Found one for a 4th gen 4runner, but it doesn't match what I'm seeing on the GX.
GX Dash wiring diagram?
- Thread starter madtoy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
GX - 1st Gen (2004-2009) - Club Lexus Forums
check the stickies in this forum, lots of wiring diagrams
check the stickies in this forum, lots of wiring diagrams
- Thread starter
- #3
Thanks. They seem to have everything except the combination meter diagram :/. I believe the 2003-2004 is different than the 2005+, which is why the 4Runner one I found doesn't match (it's a 2004). So I'm thinking a 2005+ Runner would work also. Driving me nuts. All I really need is to know which wire is the VSS input from the SKID controller.
little_joe
SILVER Star
I found this treasure some time ago for a 2007 4R as a reference for my GX - hopefully it'll help? Toyota Factory Service and Repair Manual - 2007 4Runner + Updates
- Thread starter
- #5
Wow! This is a treasure
. I think I may have found what I need in this. Looks like it's the C9 connector, terminal 4. Doesn't say the color, but looks to be the speedo input signal if I'm reading it right.http://4runnerclub.com/i/4r_files/f...07toyrm/07toypdf/07rmsour/4runnerr/052003.pdf
- Thread starter
- #6
So this doc is exactly what I was looking for - http://4runnerclub.com/i/4r_files/f...07toyrm/07toypdf/07rmsour/4runnerr/052000.pdf
It shows the speedometer input signal on C9-4, and states it being a gray wire with red stripe. Same as the 03-04. Unfortunately, the GX is not the same. That color wire is on the C8 connector. I tapped that with the speedodrd, and it didn't seem to change a thing. So I'll try tapping the C9-4 to see if the connector is correct, even though wire color is different.
Thanks Little-Joe for the link though. Tons of great stuff there.
It shows the speedometer input signal on C9-4, and states it being a gray wire with red stripe. Same as the 03-04. Unfortunately, the GX is not the same. That color wire is on the C8 connector. I tapped that with the speedodrd, and it didn't seem to change a thing. So I'll try tapping the C9-4 to see if the connector is correct, even though wire color is different.
Thanks Little-Joe for the link though. Tons of great stuff there.
I have all the factory manuals at home on my PC. Let me know if you still need something when I get back this Friday.
- Thread starter
- #8
Definitely! I'd hate to be guessing when cutting the factory wires (which I've done to one now already :/). If you have the GX specific diagram for the combination meter, that would be great! Thanks.....
PM me your email addy
