For those of us who are contemplating or in the midst of the mini disc conversion and will be needing the bushing for the tie rod. The Borg Warner Part # is SB0, and that cross references to Auto Zone # 4200B. I'm posting this because I've been searching for a little over a week and NAPA, Oreilly's or any of the other local stores have no clue what I was looking for. Hope this helps someone.....
Kevin
Also, If your tool poor like me and don't have a vice to press the bushing in. You can use a bolt that will fit thru the steering arm, put washers on either end and tighten it up. It will seat it just right...
Kevin
Also, If your tool poor like me and don't have a vice to press the bushing in. You can use a bolt that will fit thru the steering arm, put washers on either end and tighten it up. It will seat it just right...
Last edited: