*FREE* stuff for local pick up - Anything and everything goes (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Does anyone want my factory roof rack before I toss it?
 
Free landcruiser mousetrap.

Have rodents chewing on your wires?
Install a cat!

Yes, you can have a highly trained highly motivated cruiser cat rodent remover.

For a limited time only this model comes with a highly polished cat habitat.
20200516_130750.jpg
20200501_120619.jpg


Posting in humor, but do have a free cat and free washer....
 
Works but won't make more than 30 psi and the compressor makes way more noise than necessary.
20200517_124520.jpg
 
80 series sleeping platform/drawers. These came with an 80 I purchased recently. 69" long total, 44.5" wide. I believe they work with the 2nd row flipped forward. Padded on top, carpet in decent shape. Drawer locks are nice, heavy duty, slides have seen better days, and some of the bearings were rescued as I wrestled the slides and they tried to escape. I am thinking it can all be rehabbed with a little work, salvaged, or repurposed, or?? Seems a shame to toss it, as I won't use it. You could also chop it down and use it solely on the cargo area.

In Flag, but I can probably deliver to the north valley.

***Spoken For***
IMG_20200530_205708253.jpg
 
Last edited:
Free Land Cruiser wheel with really really old BFG KO2 tire. I got the this for free from another member and I used it as a mock for clearance. The tire size is 285/75R16 and I'm located near downtown Gilbert.

IMG_20200601_143332.jpg
 
Just putting this out there, 3rd gen "Fat lip" front bumper for 4Runner. Going to be replaced with aftermarket soon.
 
Free landcruiser mousetrap.
Posting in humor, but do have a free cat and free washer....

Someone needs this Gato, I'd ask for mudship if we didn't have our hands full of coyotes and bobcats.
 
80 series sleeping platform/drawers. These came with an 80 I purchased recently. 69" long total, 44.5" wide. I believe they work with the 2nd row flipped forward. Padded on top, carpet in decent shape. Drawer locks are nice, heavy duty, slides have seen better days, and some of the bearings were rescued as I wrestled the slides and they tried to escape. I am thinking it can all be rehabbed with a little work, salvaged, or repurposed, or?? Seems a shame to toss it, as I won't use it. You could also chop it down and use it solely on the cargo area.

In Flag, but I can probably deliver to the north valley.

View attachment 2324890

Has this been claimed yet?
 
Cleaning out some stuff. I said in the for sale thread I'd take Chick-fil-a nuggets but I would also consider frozen dairy treats. Or just come take it, I don't need the calories.

1 x later model 100 series steering rack...removed as it was leaking but operating fine. Suitable for rebuild. In this photo it's the one wrapped in plastic.
1 x rear lower control arms. Pretty sure they are OEM. Bushings look OK but they were removed because I bent one slightly.
Pair OEM torsion bar non-AHC.
Pair OEM torsion bar AHC.

IMG_9705.jpg
IMG_9706.jpg
 
Cleaning out some stuff. I said in the for sale thread I'd take Chick-fil-a nuggets but I would also consider frozen dairy treats. Or just come take it, I don't need the calories.

1 x later model 100 series steering rack...removed as it was leaking but operating fine. Suitable for rebuild. In this photo it's the one wrapped in plastic.
1 x rear lower control arms. Pretty sure they are OEM. Bushings look OK but they were removed because I bent one slightly.
Pair OEM torsion bar non-AHC.
Pair OEM torsion bar AHC.

View attachment 2339102View attachment 2339103

Hey would you ship? I just bent my rear LCA and need 1 only. I am in PA Thanks
 
1x set of fj80 TJM adjustable height shocks for a stock height truck. I replaced them with icons, nothing wrong with them. I dont have all of the hardware, but most of it is there. i will throw them out in 1 week if nobody wants them.
 

Users who are viewing this thread

Back
Top Bottom