2006 Sienna AWD limited for sale. $6500 obo. Let me know if you know anyone interested. Thanks!
For Sale / Wanted Thread (2 Viewers)
- Thread starter Isotel
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Stuff I need gone donations to charity or free.
For FJ40 ;High Steer Kit, Shackle several kit, Heat shield, two wheels for early FJ40 sand blasted an primer coated.
Misc: Mig Welder Cart new in box, welding helmet and gloves, Compressed air distribution kit new in box, Electrical Sub Panel with 50 amp circuit and associated cables, sq and round tub steel, wire cable with hooks for winching. two jack stands, 12 volt battery core.
For FJ40 ;High Steer Kit, Shackle several kit, Heat shield, two wheels for early FJ40 sand blasted an primer coated.
Misc: Mig Welder Cart new in box, welding helmet and gloves, Compressed air distribution kit new in box, Electrical Sub Panel with 50 amp circuit and associated cables, sq and round tub steel, wire cable with hooks for winching. two jack stands, 12 volt battery core.
I could use the mig cart and accessories, maybe the compressed air distribution kit too. I’ll DM you for details
Hey all, I'm looking for a low mile 5.3, and 6l80 if possible. I know there are a few out of FB and Craiglist, but if any of you have something I may be interested in, please let me know!
-DJ
-DJ
I'll pu those items aside for you can will call you to set up a time to pick up.
I'll take the 40 wheels if you still have them.
I still have them will put them aside for you.
Sounds good - let me know when is a good time to pick up! To bad I didn't see this yesterday.
Doug, hook me up with whatever you got left. I’m happy to help!
Hey @Pops I am very interested in the jack stands. I just moved back to Colorado after getting rid of all my tools a few years back when I moved away. Trying to gather together essentials again. Give me a call or text if you still have them, or send me a message here. (72O) 432-7236
I’m looking for 2 x 16x8 wheels (Toyota 6-5.5 lug) for a trailer project. Been searching CL but no luck dealing with the flakes. Anyone have any laying around?
—
Disregard: I found what I needed
—
Disregard: I found what I needed
Last edited:
Just picked up an 1991 80 series. Doesn’t the rear cargo carpet or wheel arch carpet covers. Anyone selling theirs and have some spares?
Give me a call or text. 719-208-1318. Tony
Give me a call or text. 719-208-1318. Tony
Anyone looking for some 80 series wheels?
Perhaps.
Maybe to put on the 4 runner I picked up
Sorry they are gone.
Looking for a cheap set of wheels for my 70 series. I think 80 series will work fine they just have to be 16s because I have a full set of tires that are for 16in rims that I want to use.
Thanks,
Pete
Thanks,
Pete
Posting for my buddy. He has a great FJ cruiser for sale in the Aspen area. Great shape as he loved and definitively took care of it. He is only selling since he just purchased a Tundra to tow his trailer...
2011 FJ Cruiser 4X4 Automatic 168K - cars & trucks - by owner -...
This is by far the most enjoyable, versatile and reliable car I have ever owned. It breaks my heart to be selling this FJ but my towing needs have changed and I’ve upgraded to a truck. Unfortunately...
rockies.craigslist.org
80 series roof rack, $250 - SOLD
Based on the JMoose rack design from the mud forums a few years back. Basically a welded aluminum ATV ramp bolted together. I beefed it up a bit. 48" wide by 56" long.
Most of the hardware & rivets are stainless or coated so there's very little rust. There are some additional steel brackets bolted to the side that you can use for other gutter mount stuff - I used it for my Yakima bars & ski rack.
This has done well for me for years and has carried alot of gear across CO, UT, NM, WY, MT.
I probably won't come down much on the price - the Smittybilt gutter clamps are $166 alone so I'll keep those for some future project and recycle or re-use the rest it comes to that.
Based on the JMoose rack design from the mud forums a few years back. Basically a welded aluminum ATV ramp bolted together. I beefed it up a bit. 48" wide by 56" long.
Most of the hardware & rivets are stainless or coated so there's very little rust. There are some additional steel brackets bolted to the side that you can use for other gutter mount stuff - I used it for my Yakima bars & ski rack.
This has done well for me for years and has carried alot of gear across CO, UT, NM, WY, MT.
I probably won't come down much on the price - the Smittybilt gutter clamps are $166 alone so I'll keep those for some future project and recycle or re-use the rest it comes to that.
Last edited:
For Sale!!!
$7000 obo.
Tony 719-208-1318
www.facebook.com
$7000 obo.
Tony 719-208-1318
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Last edited:
