Wanted FJ60 Manual (53 Viewers)

[yooper]

Back to the top. UPS fawked up Jason's door so I still need one.

Anybody got a rust free, dent free FJ62 driver door?

 

[Texx]

Depends on how good you want...I have one w/a little hail in Tx, $40.00 and the ride...klrtexx at aol if interested, or pm me..

 

[red66toy]

stock, the cruiser isn't lifted.
New is fine with me.

 

[jimm0921]

78 FJ40 parts needed

Fuse box cover
bottle jack two piece crank and holder
bottle jack holder
rear half doors or drop down tail gate
metal half doors
windshield washer bottle with motor

Thanks

 

[Deep South Cruisers]

Email And Pics Sent!

 

[Morse_FJ40]

Gas Door Housing

I am adding a matching gas door to my rear tank. I have the door and loclk, but I need the housing that attcahes to the body. Needs to be near a '78 so it has the rectangle door.

thanks

Ryan

 

[dfcruiserguy]

Drivers side turn signal lens

anyone have a cheap drivers side turn signal lens?

 

[Trained Killa]

FJ40 Hard top parts needed for a '77

Hey guys, I am looking for the pieces that go above the front doors. When I bought my truck, the top was in pieces. I am trying to get her back together and painted before winter. Those are the only pieces missing. PM me if you have any that are in decent shape. Pictures would be nice too. Email is as follows anthony.warren@msjack.ang.af.mil

Thanks

Tony

 

[mike]

for what type and yr of cruiser?

 

[65swb45]

for the starter, look for one from a fj60, its a gear reduction unit and will bolt right up, starts faster, lighter, many more around.

Cheaper to ship too.

 

[teapot]

Give Luke A call at 4x4Labs, I believe he makes the arms for both small and big bolt pattern. I could be wrong though.

 

[teapot]

Mark Vickers, A.K.A. Dashman is the man to call and a very good guy. (408)947-1530

 

[cruzerman350]

thanks. those new ones are a whole lot more expensive than i thought they were. anyone got a used one?

 

[72FJ40LandCruiser]

Ttt

 

[mike]

I have a spare starter from a 77fj40. Let me know if it will work for ya. Thx

 

[toyman317]

Anyone have one of these coolant bottles?

 

[71-CRUISER]

I know he does but I might as well switch to the better knuckles at the same time as High Steer.

 

[Clyde-2]

Need Lower T-stat Housing In Tx

Need a lower T-stat housing(the one they don't make anymore) for my 4/75 2F FJ-40. mike

 

[3pits]

I have one but dont know if it is from a 62 or a 40,,, send me a better picture,,, dragondesigns at mindspring.com

ignore the spam blocker return email just put "land cruiser" in the subject line and I wil pick it out

 

[3pits]

ooo you might be inluck,,, I might have one, I have an older one with out the door, but I just got a 77 that is being parted and have lots left over from a 75 I am parting,,

I know i have one on the 77,,, pm me an offer and your zip for shipping ,, also tell me how much flange you want