Wanted FJ60 Manual

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I still stock the ConFerr rear seats that were specifically designed for the FJ40. Pics under section 200 of my website. You can call the shop to follow up. :)

One will go up for sale late Friday on Ebay.
 
Last edited:
bellhousing cover

i need a four speed bellhousing cover, i swaped out the three speed to a non us four speed, now i need to keep mud off my clutch. i live in costa mesa. thanks :cheers:
 
Trade? for soft top

I am looking to possibly trade a NOS 1969 OEM left rear quarter pannel for a complete soft top in good to excellant condition. Let me know if there is any interest.

Tate
 
WTB cheap 2" reciever hitch for 80 series

cheap as in I'd change the color of my sunglasses from silver to black with a sharpie marker rather than replace them.....cheap as in local (New England) availability prefered.....Cheap as in.....well you get the idea.....
Rob M
Concord, MA
 
You have PM
 
Wanted f2 motor or bottom end

I am posting this for a friend in BC Canada.
He is looking for a F2 motor for his cruiser.
Hopefully something in Washington State.
He can drive down and pick it up no problem.
A complete block would also do.
He has a good top end but the bottom end is roasted.

If anyone can help him out.
Call
604-533-1772
Ask for Stan and make the arrangements with him
or feel free to e-mail me
steve@orodesigns.com
 
Is this what you are looking for?

IMG_2803.JPG
 
WTB - 2F Valve Cover

Anyone?

Need a valvecover like this, 2F, thread in cap, "tall" profile.


LMK what you have, where your at, and what you want :D
kurt@cruiseroutfitters.com
VC 001.jpg
VC 002.jpg
 
Bellhousing

I have got a ADVANCE ADAPTERS v8 to toyota 4 speed bellhousing. 11" Clutch disc,clutch arm, throwout bearing, pilot bearing, crossmember and crossmember mounts. Also have correct length driveshafts. Rear driveshaft was lengthened by machine shop, and I shortened the front. All you need is a pressure plate that will fit your flywheel and you are set. I'll take $400.00 for all of it. Located in North Alabama. Shipping is going to be high for everything. I can meet/deliver. Give me a call 256-505-1373 J.R.

I am pulling off my truck this weekend. I am switching all Chevy. I am keeping motor mounts, don't want to mess with all that. Motor mounts in JEGS or Summit run about 30 bucks.


Call if you got any questions.

J.R. 256-505-1373
 
FJ40Jim said:
Kurt,
Do you want that exact one, 01/79-7/80 style?

Or can you use the shorter 8/80-newer type?
Click to expand...


Not without changing the valve train... so I am trying for that exact one.

(I would put a cover on mine that was only out for a few months ;))
 
3FE & harness - in Western US

Pricing out a conversion in my Cruiser...

Looking for a complete 3FE engine, complete with harness, emissions, etc for an engine swap. LMK what you have and what you want. Closer the Utah the better. Thanks!
 
I have several intake and exhaust manifolds. What style do you prefer? I think 76 and newer used the 3 piece style. Look at sor.com. Trent
 
You must log in or register to reply here.

Similar threads

flem0061
For Sale Haynes Manual 1980-1996
Replies
2
Views
400
cts
C
N
Wanted Manual front seat 80 series
Replies
0
Views
252
NeedNCtoy
N
65swb45
SOLD SoCal: 1988 Factory Repair Manual
Replies
5
Views
579
Yotajeff
Yotajeff
dr_dobro
For Sale FJ60 FJ62 Manual Chrome Door mirrors
Replies
0
Views
431
dr_dobro
dr_dobro

Share this page

Back
Top Bottom