Wanted FJ60 Manual (19 Viewers)

[3_puppies]

Re:Tranny/Engine mount bushings needed

sent you a PM

 

[cruiser_guy]

Re:13BT EXHAUST MANIFOLD

Good luck, you're going to need it! The 13B-T was not imported into North America officially. I would try Geoff Walsh Engine Parts in OZ. Failing that there is a guy out west here that is bringing in 13B-T's but I doubt he's got much parts laying around for them. If you want his e-mail drop me a PM and I'll send it to you.
Mine trucks are likely to be the newer 6 cylinder engine (1HZ?) and not a "B" series.

 

[cruiser_guy]

3B altenator/vacuum pump & other engine parts

I need a 3B altenator/vacuum pump (12v) plus the fuel overflow lines from the injectors (the ones that connect all injectors together) plus other small bits and pieces for an engine rebuild.
Anyone parting out a 12v 3B powered 'Cruiser?

 

[ranger]

Re:Birfield anyone?

[quote author=bad_religion_au link=board=6;threadid=4842;start=msg37463#msg37463 date=1062585647]
you could just put the axle together without the birf and sell it like that... i would never do this my self, but i know a few people who have been on the wrong end of a seller that would do something like that.....
[/quote]

Why would you even suggest anything like that? If you are going to post, add comments that are useful..... :

 

[70L34]

WANTED: FJ62 Transfer Case

Hey everyone,

My transfer case grenaded (loudly) this afternoon so I assume the gears are shot too. Looking for a good FJ62 transfer case for a reasonable $. Email anausied@hotmail.com

Thanks,
Tony

 

[informationjunky]

Re:Fan clutch for 79 fj40

Like Rick said, I rebuilt mine and it lasted about a year, and then went to HOT for about $45. So its not that much more vs silicon to rebuild.

 

[nspctr1]

Re:disc-brake axle(s)

there is one for sale on ebay

 

[Man Jerk]

Re:Feelin' tubby

I know someone who's got a good tub. But...it's in minneapolis, mn

http://www.mntoyx4.com/forums/index.php?act=ST&f=14&t=2334&s=7401fcb47c78d95ba8c2fd2cbb9a6834

 

[Landpimp]

Disc brake fj40/55 wheels in WA or ?

Like it says, looking fj40/55 stock disc brake wheels, so years 76-80 will work, these are the hub cap style 15x5.5 wheels. I would like to find 4-5-10 of them. Hopefully in western WA, shiping these wheels isn't really worth it but if the price is right I would consider it.

if ya got em let me know.

Thanks
John

 

[R.K.]

Re:2f engine wanted

I have a good 2F from a '75 FJ40 I bought for parts. I'd take $500 for the complete engine. Located in North Carolina.

 

[tin_fish]

Re:Roll Bar

Do you still have either one? I would be more interested in the stock roll bar. I am in Omaha. Let me know.
tin_fish2000@yahoo.com

 

[tin_fish]

Wanted Soft top/ Hard top soultion

Looking for a Bestop Supertop for a '77 40 with an early aqualu tub. Tub does not have factory lip. Would also like to know if there is a way to put a hard top on my 40-thanks

 

[red66toy]

doors needed

I am looking for a good pair of doors for my 66 FJ40. Any help with this would be great. I am located in Arcata, CA. Thanks.

 

[TJDIV]

Re:2f engine wanted

I've got ford straight six and a CJ7 straight six from an 83. Not what you want, trust me....I hate them both. But you can buy one if you want......

 

[tin_fish]

Wanted Roll Bar

I need a stock roll cage for a '77 fj40. I am in Omaha.

 

[LandcruiserNW]

Re:doors needed

I have a set of 74 doors that should fit your truck..... They are in good shape although they need new door seals. Let me know if your still interested....
Please respond to LndCrsr76@aol.com

Matt Gustafson
Owner
LandCruiser NW
www.landcruisernw.com
503-224-5115

 

[LandcruiserNW]

Re:Feelin' tubby

I have a number of tubs, although I'm in Oregon. If your interested let me know.....
Reply to LndCrsr76@aol.com,
Regards,
Matt Gustafson
Owner
LandCruiser NW
www.landcruisernw.com
503-224-5115

 

[rockcod]

Re:Feelin' tubby

Mark,

Thanks for the reply, but Minneapolis is a bit too far.

Shipping would be huge!!!

Tony

 

[Man Jerk]

Re:Feelin' tubby

i figued as much, but you never know.

Good luck.

 

[4DOORFJ]

Need stock 60 series rear shackles

Jason @ 530-521-7806