Wanted FJ60 Manual (5 Viewers)

[Tigerstripe40]

79+ steering knuckles.

I am looking for some 79+ steering knuckles for either a Cruiser or a minitruck.
Gathering parts to do a spring over, and I want the wider bolt pattern with larger studs.

Thanks!

-James

 

[sc40]

Greenville, South Carolina

 

[DomSmith]

Links work for me now. Your best bet for the defroster hoses is OEM ($) or simple defroster hose from your local parts place. I used 2.5 defroster hose (carquest #7768-4175) for my '73 40. Came in 6' length and cut to size. Cheap, easy and have been running them for years.
Dom

 

[Tigerstripe40]

i want a carrier and diff, and ring gear (4.11) for a fj-40. it would be even better if it was welded
thanks all

I think I have one of these. Not welded but open. I don't have a matching pinion to go with it, but I can look to se4e if I have it.

 

[sc40]

How much do you want for it? w/o ring gear

 

[Got Cruiser?]

80 series third seat

I've got a pair of 80 series third seat in grey interior cloth. Great shape, no tears or stains. missing 1 headrest. $300 pair plus shipping. Can see pictures at http://www.cruiserland.com/parts/parts4.htm Thanks for looking.

 

[Poser]

Ring and pinions are supposed to be run together, and not mixed...

 

[pappy]

If you get stuck all three were still available OEM a year ago. I bought them.

 

[sc40]

sry i ment w/o the ring and pinion (whitch cannot be found)

 

[nuclearlemon]

make your own defrost ducts and the rubber boot between the housing and the blower tube is part number 87212-60031 iirc

 

[DIESEL40]

I have a front course spline 4.11 third if your interested. Located in Missouri. You might be able to find one closer though??

 

[Tigerstripe40]

sry i ment w/o the ring and pinion (whitch cannot be found)

I will look. I am not going to be over where my parts are until tomorrow evening around 9pm.

As far as price, I don't know. how about $15 + shipping?
DO you want side gears or empty? I think I have 1 empty carrier, and 1 with the spider/side gears.

However, I think that a full third memeber from Mo might be your better bet.

 

[yoda-g3]

Cool guys, thanks for the info. Just curious though, what does iirc mean?

 

[Poser]

contact dd113 out here...

Pretty sure he would have something..

Atlanta GA


http://www.urbanlandcruisers.com/products.html

 

[esde]

4.11 carrier in northeast

Busted my coarse spline 4.11, need a replacement. If fine spline I'll need a driveshaft flange also. Must be complete, all of my guts are hosed save one spider gear. Located in Phila, Pa

 

[Cruiser_Nerd]

I should have coarse pinion third in Connecticut, PM me if you can't find anything closer.

 

[madams557]

Have 1 spare of that size and brand sitting in Colorado. Well over 95% tread, doubt it was ever used. Zip is 80526 if you want to check on shipping options.

 

[Owyhee Jackass]

I need a VSV...anyone?

I need a vacuum switch valve for a 10/72 mfg date vehicle. I think 9/71-1/75 will work.

It's the box on the DS fender with 4 vacuum lines going in and out, item 7 in the pic. My vacuum for the distributor advance is not working.

 

[clemson55]

I've got a whole rear axle for a 55 in sc pm if thats of any interest to you.

 

[weigellj]

oil pressure sensor/temp sensor/Engine wiring harness for a 1992 FJ-80 LC

Subject pretty much says it. Looking for the following for my lil project.

oil pressure sensor/temp sensor/Engine wiring harness for a 1992 FJ-80 LC 3fe engine.

The harness I need unplugged from the main computer and the main harness. I am basically looking for the starter wires/temp/oil. If the emissions were cut, it would not be a big deal. Also alot of boneyards are lazy and like to just cut the harness at the firewall. That would be fine also. I am mainly looking for the inside plugs that go to the computer and then to the main harness. If anyone has anything like that, please email or pm me.

weigellj@yahoo.com

Thanks

Lee