Wanted FJ60 Manual (78 Viewers)

[Degnol]

Need choke and throttle setup F engine, Aircleaner setup Aisin carb with mini PS

I see what you're missing, but I don't have an extra...sorry.
What is missing is a plate that attaches to the outboard two studs on the carb, kind of a right angle bracket that has a pivot point for that "dangling" rod. Then you need a fairly common linkage piece that has a ball clip on each end. Your best bet is to contact viccin@centurytel.net Talk to Vic or Cindy and they have what you need. I recommend them simply because I've bought a lot from them and they ALWAYS have what I need. Any other yard will have it, too. Probably simpler than trying to fab or scrounge it yourself.
Ed Long

 

[johnny]

wanted fj40

well, it is with considerable joy that i get to post this. i have fallen into a sum of money and am looking for an excellent fj40. i do not need over the top, but i know what is reasonable. i currently have a 76 fj40, and instead of restoration i'm just going to sell it and get another one.

what i want----
1) it must be olive green. nothing else consitered.
2) must be 76,78,or 80. no odd years, and yes i know all the differences in models.
3) V8, or an improved(modified) 2f
4) rattle free
5) virtualy rust free. and good paint
6)p/s
7) many other things i want to list, but anyone who is selling a cruiser at this price ahas probably got what i am looking for.

i am in no hurry. i live in texas and will pick it up from most any state. please if you know friends of friends or seen one in a lot let me know.

email-johnnymcelmurry@hotmail.com

please let me know, but i am also in the market for a duccatti and may go with speed. i don't know. i'll wait around and see what comes up.

thanks in advance

 

[FJ55partsBoise]

Need choke and throttle setup F engine, Aircleaner setup Aisin carb with mini PS

Ed-

Thanks a ton. I found the plate now. ("What is missing is a plate that attaches to the outboard two studs on the carb, kind of a right angle bracket that has a pivot point for that "dangling" rod.)"

I still need this "Then you need a fairly common linkage piece that has a ball clip on each end. I need the one that connects to the carb throttle with the pivot piece.

and I also need a complete original choke cable for a 1974 landcruiser FJ40.

Again thanks

 

[Degnol]

Need choke and throttle setup F engine, Aircleaner setup Aisin carb with mini PS

Hell, if you're working against a deadline, go get a generic at any autoparts store then look for a cherry one later. You'll only have about $5-6 in it. The one that's on there will probably work if you take it out, un-kink it , gease it and re- install. Those ball-clip rods are not cruiser specific, check your local boneyard or NAPA.
GL with the deadline!
Ed

 

[Landpimp]

Wanted fj60/62 speedo/odometer

So it looks like a fj60/2 odo is the same as a late model fj40. So I am looking for a working speedo/odometer with around 130,000 on it.

I managed to bugger up my fj62(off the sorta parts rig) speedo trying to run the miles back from 340k to 130k(what the 40 has on it) So I aint messing with that again I just want to pop the odo out and pop the new one in the 40

if you got something let me know at
jholmaas@hotmail.com

 

[red66toy]

Wanted fj60/62 speedo/odometer

There is a guy on the coolcruisers board parting out a FJ60 and 62. Hope you find what you are looking for. Here is his email: FJ62Cruiser@aol.com

 

[Greddy0]

Looking for some use OME heavy

I'm looking for some used 850 and 863 springs. Maybe used for a couple of years but still in good condition. Looking for used springs because my garage is a tight fit and would prefer springs that have settled already. Hopefully someone is upgrading their and have some old one laying around : Thanks all

 

[TOY4X4HOPEFULL]

Manuals

Hello All

This is actually my first post on this board, but I am sure it wont be my last. I am looking for an owners manual or 2F or what would be great would be a shop repair manual for my Cruiser. Please if you have one for sale post or email me.

Thanks

 

[Landpimp]

Manuals

Owners manuals can be had from Toyota for $10, they are reprints.

Also check Ebay for the service manauls, you will need 3 of them, the 2F motor manaul, the body and chasis and the emission manual.

 

[Landpimp]

Wanted fj60/62 speedo/odometer

thanks, I know him, and emailed him, and Chris is sending me a 62 speedo with 240000 on it, for free(I gave him some fj40 parts last year) hopefully I can run it back without busting it

still would like to find a odo that I don't have to mess with


[quote author=red64toy link=board=6;threadid=11527;start=msg105068#msg105068 date=1076812082]
There is a guy on the coolcruisers board parting out a FJ60 and 62. Hope you find what you are looking for. Here is his email: FJ62Cruiser@aol.com
[/quote]

 

[Degnol]

Wanted: Wire mesh Headlight covers....and other stuff

Don, I was just looking thru Specter's Catalog and you can buy the Chrome ones NEW for like $11. Sounds like a better deal to me, but then you might want to add some things to your order due to the minimum shipping and "handling"
GL
Ed

 

[jemmy3]

Re:1978 fj 40 frame wanted

I may one in the next few months here in WV. It's a 78 that i have been sellling parts off of...... jemmy@citynet.net

thx,
John

 

[TOY4X4HOPEFULL]

Manuals

Thanks for the reply. Does anyone out their have any of these manuals.

 

[Wadesters]

Need intake manifold for an 82 FJ40 with 2F engine

Check the following site for picture and prices:

http://www.fototime.com/inv/BB5A28DF1E1FF3C

 

[s79bj40]

Re:terrain tamer suspensions

there seems to be a lot of it around atm, and i think i saw they used koyo bearings. Sunshine state 4x4 down the road sells it but i havn't had a look yet. You might just have to ask around the 4x4 shops, but i cant see it being any better or worse than half the other aftermarket automotive stuff out there

Sam

 

[notagp_afj55]

Non USA Turn signal Markers

Looking for turn signal markers that mount on to the
side apron of a bj-40/42, bj-70. Does anyone have or know how to get a set to mount on my cruiser?
thx

 

[Landpimp]

Non USA Turn signal Markers

Heart Of Texas Off Road has/had them.

 

[ruftoy]

SM420

I am concidering a Sm420 install, anyone have one for sale in the southeast?

Semper Fi
Kerry

 

[Texican]

Non USA Turn signal Markers

http://www.liquidoffroad.com/contact.htm

They have changed their name and moved to within 30 miles of me...........does anyone know these guys or the owners name???
Butch

 

[Texican]

Non USA Turn signal Markers

BTW they show to have the signals you are hunting, go to the Land Cruiser section and then on the trim then electrical....$99 pair

or just click here

http://www.liquidoffroad.com/electricalLC.htm



Butch