How can i get touch with FJ40Jim I've sent him several PMs and emails but have not had much luck. A phone number or something. My smog is dying and i need his idler pulley set up.
FJ40Jim Smog pump Idler? (Jim Chenoweth )
- Thread starter Cruzer_89
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,199
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
PM sent.
One can be made easily from a 3F adjuster assy.... part# 16630-61020 some pics here post #5--- https://forum.ih8mud.com/showthread.php?t=114588
ok...thanks for the note..grant...
you guys have problem with some of the pics posted lateley? when I went to the link two of the pics are srewed up...
anyway on the bracket .... I would like to buy one from Jim..... but if I can't do that in a reasonable time frame I'm going to be forced to look at either something like the above or maybe setting up a 2nd alternator.
does the 3f bracket bolt in to existing holes (on a 2F engine) on the bottom side of the bracket? From the pic I could see it looks like you made some type of spacer on the top to line up with one of the bolts on the P/s pump? Hard to tell with what I could see.
On the 3f..... where does that adjuster bracket bolt to? the lower right hand side of the engine? And which belt does it work on?
thanks...
you guys have problem with some of the pics posted lateley? when I went to the link two of the pics are srewed up...
anyway on the bracket .... I would like to buy one from Jim..... but if I can't do that in a reasonable time frame I'm going to be forced to look at either something like the above or maybe setting up a 2nd alternator.
does the 3f bracket bolt in to existing holes (on a 2F engine) on the bottom side of the bracket? From the pic I could see it looks like you made some type of spacer on the top to line up with one of the bolts on the P/s pump? Hard to tell with what I could see.
On the 3f..... where does that adjuster bracket bolt to? the lower right hand side of the engine? And which belt does it work on?
thanks...
Do a search on recent threads. I saw a post where a Cruiserhead replaced his smog pump with a one wire GM alternator and ran two alts and batteries. Said GM part was a bolt in......
- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,199
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
Thanks for writing.
I get a bunch of emails and simply can't respond to every one.
Please email again and put something catchy in the subject like "FJ60 on fire, please help!!!"
and I'll try to get back to you.
I loved the JimC idler instead of the air pump, it worked great.
But atlas, the 2F is pulled and the idler sits in the garage, very much idle, looking for a new home
dougbert
But atlas, the 2F is pulled and the idler sits in the garage, very much idle, looking for a new home
dougbert
Calling Jim C!
Hi Jim, hoping you catch this message - Its time to jump ship on my Weber 38 and go with the stock Aisun, hopefully with your expert re-build (and perhaps a review of desmog steps.
) Please let me know procedures to send in when you can,
Thanks!
Hi Jim, hoping you catch this message - Its time to jump ship on my Weber 38 and go with the stock Aisun, hopefully with your expert re-build (and perhaps a review of desmog steps.
) Please let me know procedures to send in when you can,Thanks!
gregnash
Anal Retentive Analyst
Look in the vendor marketplace as he has a thread there with all the information needed. Can't go wrong, great service and great products.
