SOLD fj40 used SUA kit can fit 34' no trimming (1 Viewer)

[csd1982]

Location

United States

i have a used SUA kit I just took off my fj40 as I'm going SOA. The kit was barley used by PO as it was barn kept. The kit allowed 34x10.4 Swampers to fit with no rub or trimming.

The bushings are still good and below are the parts:

4 springs
4 shackles - hell for stout
8 greasable shackle bolts
4 greasable hanger bolts

$300 and I'm located in Chicago.

 

[rorkis]

What make are the springs?

 

[csd1982]

Not sure...sent you an email

 

[SNG]

i have a used SUA kit I just took off my fj40 as I'm going SOA. The kit was barley used by PO as it was barn kept. The kit allowed 34x10.4 Swampers to fit with no rub or trimming.

The bushings are still good and below are the parts:

4 springs
4 shackles - hell for stout
8 greasable shackle bolts
4 greasable hanger bolts

$300 and I'm located in Chicago.

Could you send me some pics?

 

[csd1982]

Could you send me some pics?

Email?

 

[SNG]

Sent a PM

 

[wileycoyote]

If these are hfs springs I will take the kit.

 

[csd1982]

Here are a few spring pics

 

[csd1982]

Here are the springs on my ride with 34x10.5 swampers before the SOA. There was no rubbing or trimming in the rear. It's just a bad angle

 

[csd1982]

If these are hfs springs I will take the kit.

I don't think they are unless the old HFS kit were not military wrapped. I know the shackles are HFS

 

[MOTOV8R]

Are there any stamp marks on the spring clamps? The long squared off spring leaf looks like an add a leaf. Maybe a stock spring pack?

 

[csd1982]

Are there any stamp marks on the spring clamps? The long squared off spring leaf looks like an add a leaf. Maybe a stock spring pack?

I think even OEM springs had the military wrap

 

[MOTOV8R]

True, also the taper doesn't look like stock springs. Can't quite tell from the pics but it looks like there might be anti friction pads in the leaf ends as well.

 

[csd1982]

True, also the taper doesn't look like stock springs. Can't quite tell from the pics but it looks like there might be anti friction pads in the leaf ends as well.

yes they have friction pads. See the pics

 

[csd1982]

Hi All,

Still no idea about the make. No markings that I can see anywhere. I took a few more pictures and I'm still trying to contact the PO to find out if he remembers.

Picture 1 shows the friction pads between the leafs

Picture 2 shows both the font and rear springs.

These are good springs IMO for light/moderate offroad, highway driving and fitting up to 34's.

If you are expecting great springs for awesome flex and clearance then do an SOA like me.

 

[csd1982]

Ok just found out they are Black Diamond Springs.

 

[trent gross]

i have a used SUA kit I just took off my fj40 as I'm going SOA. The kit was barley used by PO as it was barn kept. The kit allowed 34x10.4 Swampers to fit with no rub or trimming.

The bushings are still good and below are the parts:

4 springs
4 shackles - hell for stout
8 greasable shackle bolts
4 greasable hanger bolts

$300 and I'm located in Chicago.

still got the spring kit

 

[snaggletto]

Check PM

 

[csd1982]

still got the spring kit

Yes

 

[csd1982]

Check PM

Nothing there in PM