- Thread starter
- #21
I don't remember - I think it's 14+ due to lithium, but I never changed it from initial set up a few months ago. I'll check that though, as it's bugging me. Have to remember how to do that.
Epever Controller/solar/battery question (2 Viewers)
- Thread starter Tennessee Jed
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It would be better to have more information to make sense of all this.
That graph above in post 19 could simply show the controller going from float to absorption to float on the battery side, depending on settings. Nothing wrong with that. The question is whether the fridge was going or not at the time.
I'm sure you do realize that if you put your smartshunt next to the battery, as you normally would, the current displayed in the graph above does not necessarily reflect the current coming out of the load port of the controller, which is what you seemed to have connected the fridge to earlier.
Does your controller provide power from the battery on the load port if there is no power coming from the panel?
That graph above in post 19 could simply show the controller going from float to absorption to float on the battery side, depending on settings. Nothing wrong with that. The question is whether the fridge was going or not at the time.
I'm sure you do realize that if you put your smartshunt next to the battery, as you normally would, the current displayed in the graph above does not necessarily reflect the current coming out of the load port of the controller, which is what you seemed to have connected the fridge to earlier.
Does your controller provide power from the battery on the load port if there is no power coming from the panel?
