Engine/Tranny/T-Case...what mates to what? (1 Viewer)

Joined
Feb 2, 2005
Messages
4,511
Location
Albemarle NC
Ok, so the 100 series tranny bolts to the 80 series T-case....

The H55F bolts to the A440....

Catch my drift? What else from what other vehicles can be swapped in without adapters?
 
Joined
Mar 20, 2006
Messages
1,821
Location
elkcreek canyon colorado
 
 
I think the motor goes first....then..:hmm: the tranny... and the t-case I think is last but I may have that backwards. All kidding aside, it would be a great to put a 100 motor and tranny in an 80 series, it would solve the no power issue!
 

Onur

19000-17930
Moderator
GOLD Star
Joined
Aug 28, 2004
Messages
28,355
Location
Tabasco, NY
 
 
 
The older 100's used the A343F...
Yes, but these will not mate to a 1FZFE due to bolt pattern differences as well as the fact that the 100 series got rid of the throttle cable and was a completely computerized shift system.

IMHO, you can make anything mate with anything as long as you have money and some ingenuity.

-o-
 
Joined
Feb 2, 2005
Messages
4,511
Location
Albemarle NC
You're right beno, but I don't have enough money to back any ingenuity I may have....so I'm trying to figure out what bolts up to what without adapters to avoid spending money.
 

Tapage

Club 4X4 Panamá
SILVER Star
Joined
Apr 4, 2003
Messages
23,554
Location
Panamá
 
 
 
and which it's your tatget .. ?

The A440 come with part time BF1A and full time HF2A ..

the H55F come with the BF1A and the HF1A ( part time too )
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom