Engine Rebuild

Joined
Sep 28, 2005
Messages
11
Location
Alaska
Does anybody know where I can get a cheap rebuild kit for my 2F motor?
 
Last edited:

PabloCruise

SILVER Star
Joined
Jun 3, 2004
Messages
19,590
Location
Northern Colorado
 
 
 
A machine shop should be able to get your kit.

Any interest in going to a 2F?

You could source one and rebuild that and still drive the F? (assuming it still drives)
 
Joined
Jan 22, 2003
Messages
8,118
Location
Kansastitty
 
 
 
I second Pablo on letting the machine shop get the parts, except for gaskets which I would get from Toyota. Most shops will measure the bores and order the appropriate pistons, but will not bore the block until the pistons are "in hand". And let them install the cam bearings, too.

Ed
 
Joined
Sep 30, 2004
Messages
80
Location
redondo beach
i agree. one more thing i would get from toyota would be the freeze plugs. i believe there are five all together assuming you have a f motor.
 
Joined
Jul 18, 2005
Messages
799
Location
Wellington, NZ
70chevfred said:
i agree. one more thing i would get from toyota would be the freeze plugs. i believe there are five all together assuming you have a f motor.
IIRC at least 12 in the block - then there's the head as well...
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom