Dumb: Need 9/16"x4" bolts. Where?
- Thread starter Fast Eddy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
OSH in Gilroy has them. OR Fastenal on Orbata in Gilroy.
I don't think Napa stocks them.
OR, if you can wait 24 hours: www.mcmastercarr.com
I don't think Napa stocks them.
OR, if you can wait 24 hours: www.mcmastercarr.com
You mean the bolt through the spring pack? Or through the shackles?
Try Napa or Fastenal.
Try Napa or Fastenal.
Living in the Past
SILVER Star
This is who I use. Looks like 3 1/2" is the longest they have in 9/16". It doesn't seem to be a very common size.
Copper State Bolt & Nut
It seems 14MM is more common that 9/16". Found them in 10.9 in 100MM and 110MM lengths. You might try the metric route if you run into trouble with SAE.
Copper State Bolt & Nut
Copper State Bolt & Nut
It seems 14MM is more common that 9/16". Found them in 10.9 in 100MM and 110MM lengths. You might try the metric route if you run into trouble with SAE.
Copper State Bolt & Nut
Last edited:
Osh has greatly reduced their bolt selection in the last couple of months. Fastenal or another local fastener supply is your best bet.
- Thread starter
- #6
Good point. Done. It's not _even_ worth $12 to drive down to Gilroy. I've got welding to which I need to attend.
Anyone need 3 4"x9/16" Grade 8 coarse thread bolts with Nylock nuts?
Hey John, the narrowed rear turned out sweet. If you're going to make it to Surf&Turf come by and introduce yourself. We'll be due west of the main campfire next to Skillet's white 80 with a RTT.
Or there is Olander's in Sunnyvale, might be farther than gilroy tho.
The Olander Company Inc: Best Distributor for Nitronic Fasteners in the Silicon Valley
I bought mine at the local mom and pop auto part store. Might try some of the smaller auto part stores?
If you have a Tractor Supply around you, they usually have a good selection of bolts.
Nick
Nick
