DIY: Installing a Part-Time 4WD Transfer Case Spool (1 Viewer)
- Thread starter Will Van
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When everything else was 100% done I filled it.Alright! Got the case put back together!
How long do I need to let the FIPG cure before filling with gear oil?
Will Van
GOLD Star
- Thread starter
- #43
I just wanted to say thanks to everyone for all of their help!
I got everything put back together and tested it on jack-stands. It is performing correctly. With the center diff unlocked, it would turn the rear tires. With the center diff engaged, it would turn all four tires.
Took it for a test drive and noticed less driveline vibration and smoother steering. It’s great at highway speeds! Almost totally eliminated my driveline shake at speed.
Do you guys drive around with the front hubs locked, or unlocked? I would think unlocked would be best, but it is nice to press the center diff button and rock-and-roll!
I got everything put back together and tested it on jack-stands. It is performing correctly. With the center diff unlocked, it would turn the rear tires. With the center diff engaged, it would turn all four tires.
Took it for a test drive and noticed less driveline vibration and smoother steering. It’s great at highway speeds! Almost totally eliminated my driveline shake at speed.
Do you guys drive around with the front hubs locked, or unlocked? I would think unlocked would be best, but it is nice to press the center diff button and rock-and-roll!
Last edited:
