Dissent offroad Powder coating options

[benc]

I'm getting asked all the time if there are good powder coat options that I'm aware of in certain areas.
I figured this would be a good place to post up.
If you guys with dissent bumpers and even people without have had them coated to post up the coaters name and location, cost of what you paid and if you were happy or not with the job preformed. If we could get a list of verified coaters that could be extremely helpful for new customers.
I will save a few posts at the top and start a list.
Also pics and the color you used may help some folks decide on a color as well.
Thanks!

 

[benc]

Save

 

[benc]

Saved

 

[Manhattan]

Smoking Gun Powder Coating in Atlanta.
Gallery Smoking Gun Custom Powder Coating

Evo Gray - the closest match to the OE gray trim we could find;
Black for the ribs and hardware - yeah, they powdered every nut, bolt, washer:

 

[mr jits]

Top Coat in Hillsboro Oregon has done a few jobs for me. They have a quick turnaround time and include sand blasting in their coating prices.
From past work that I've had done, I'd expect between $200-250 for a bumper.

 

[ga12r1]

Smoking Gun Powder Coating in Atlanta.
Gallery Smoking Gun Custom Powder Coating

Evo Gray - the closest match to the OE gray trim we could find;
Black for the ribs and hardware - yeah, they powdered every nut, bolt, washer:

Smoking Gun Powdercoating at ACC in Atlanta did mine as well. Very happy. Great people.

 

[Vistataco]

My bumper is on order but will have it done at North County Powder Coating in northern San Diego County. I have had several items coated there on multiple trucks and motorcycles. They do an awesome job at a reasonable price.

North County Powder Coating
2746 South Santa Fe Ave.
San Marcos, Ca. 92069
ncpc

 

[BillZ260]

Tulsa, OK
Hot Rod Powder Coating
535 N Garnett Rd
Tulsa, OK 74116
(918) 437-1990

Price I believe was $200-225
Hotcoat "Black Diamond Metallic" - an effort to match the grey cladding on the LX

Spotlights 2

• BillZ260
• Apr 14, 2018
• 1

 

[JAntosch]

wasatchpowdercoating | in SLC did my rear bumper for about $250, satin black. Not very communicative, but quick turnaround and quality work.

Rear bumper

• JAntosch
• Aug 14, 2017

 

[AggieCruiser04]

Smoking Gun Powdercoating at ACC in Atlanta did mine as well. Very happy. Great people.

View attachment 1763551

Did you do EVO gray too?

 

[ga12r1]

Did you do EVO gray too?

No, after ordering about 30 samples from prismatic i went with Galaxy Grey. I thought the EVO would be a little too dark for the lighter cladding on the earlier LXs. In the end the Galaxy Grey actually ended up a little lighter then the cladding. It’s not too bad but it’s definitely not a perfect match. If I did it again I would go EVO. That’s what I get for trying to be different

 

[AggieCruiser04]

No, after ordering about 30 samples from prismatic i went with Galaxy Grey. I thought the EVO would be a little too dark for the lighter cladding on the earlier LXs. In the end the Galaxy Grey actually ended up a little lighter then the cladding. It’s not too bad but it’s definitely not a perfect match. If I did it again I would go EVO. That’s what I get for trying to be different

I like the color in the picture. I've got a Cypress Pearl LX, and want to do something other than black. It doesn't have the gray cladding so I could go with any shade of gray. Do you have a side view of it?

 

[ga12r1]

Here is another angle. Judging by the look on my wife’s face I believe she was not impressed with me taking photos at the gas station 20 hours into the drive home from HIH8

 

[TRAIL TAILOR]

SALT LAKE, UT AREA--- Full Blown Coatings

ANDERSON/REDDING, CA --- Custom Coatings (Front bumpers 125.00 Dual swing rears (275.00)

Steer clear of Victory Powdercoating in Anderson, CA.

J

 

[bozncsurf]

Allentown PA

ADC Powder Coating
(Ask for Tim)

He did this with a single coat!

 

[ibrahim83]

Allentown PA

ADC Powder Coating
(Ask for Tim)

He did this with a single coat!

Looks great! What color is that?

View attachment 1764048 View attachment 1764049

 

[ibrahim83]

I used the coating source in Houston. Communication was great and they had a bunch of samples on hand.

About a two week turnaround.

I did have an issue where corrosion was starting to form on the welds inside the wings, was told that a Faraday effect when coating makes it more difficult to get coverage in corners.

Just had them redo them but this time with a primer first and spraying them hot instead of just two coats of powder.

The corners still aren't great, but as long as i don't get corrosion, I'm happy.

Oh, and if you're in the Houston area, hit up the nut Place for stainless button bolts at a fantastic price. I think ben was supplying them on the initial runs of his bumper.
Gives a much cleaner look.

The Nut Place · 6605 Gessner Rd, Houston, TX 77040

★★★★★ · Hardware store

goo.gl

 

[ktmracer01]

@benc I used Seattle powder coating. 2 colors and it came out to ~$450.00 after tax. I am extremely happy with the work they did and the finished product.

 

[RiverRatMatt]

Western Sandblasting and Powdercoating in Boise, ID.
Powdercoating, Sandblasting - Western Sandblasting And Powdercoat Service of Idaho - Boise, Id
$250, very happy with their work.

 

[guardcompany]

My bumper is on order but will have it done at North County Powder Coating in northern San Diego County. I have had several items coated there on multiple trucks and motorcycles. They do an awesome job at a reasonable price.

North County Powder Coating
2746 South Santa Fe Ave.
San Marcos, Ca. 92069
ncpc

They did my sliders. How did they do on the bumper? What color did you do?