Cruise Moab 2013 picture/video thread

[Tools R Us]

By this time, Bob's earlier fubar had been rectified and had rejoined the group.

 

[Tools R Us]

Another great day on the trails and the rental still had no significant damage!

 

[azTony]

We could not have asked for better weather, we were all thankful!!

 

[azTony]

So Kevin posted a pic earlier (post #63) of the extraction of my ignition. The key wore out and I did not have a spare, took the switch out so we can start it with a screw driver and had it hanging below to get me through the week.

That was not the only problem... the PO had an after market alarm installed and this was the result of the install



The purple wire was installed by the mechanics on duty and the duct tape was the insulator to the exposed contacts. This got me through the week. Unfortunately the starting was intermittent but worked and when I got home Khristal at CBT ordered a new ignition switch for me. I figured "while I am there" may as well pull the steering column and address any more wires that were behind the switch connector. Good thing, it needed it!!

 

[taccruiser97]

"Crash Pilot" Bob joined us from New Mexico.

The narrows, is now stacked at the exit, IMHO a good thing, hated that spot!

Is Crash Pilot Bob a representative of "Go Pro" cameras? If so, I saw him lay his Wrangler over on its' side last spring at the Arch Canyon Jeep Jamboree.

Just curious.

 

[lexycrzy]

Did you invite Caesar and crew to share some pix here?

I have all 2000 pictures that Cesar took, it's just finding the time to go through them and post them. More to come.

 

[DSRTRDR]

Lorna driving

 

[DSRTRDR]

So Kevin posted a pic earlier (post #63) of the extraction of my ignition. The key wore out and I did not have a spare, took the switch out so we can start it with a screw driver and had it hanging below to get me through the week.

That was not the only problem... the PO had an after market alarm installed and this was the result of the install

View attachment 758572

The purple wire was installed by the mechanics on duty and the duct tape was the insulator to the exposed contacts. This got me through the week. Unfortunately the starting was intermittent but worked and when I got home Khristal at CBT ordered a new ignition switch for me. I figured "while I am there" may as well pull the steering column and address any more wires that were behind the switch connector. Good thing, it needed it!!

View attachment 758573

 

[packetstormin]

We could not have asked for better weather, we were all thankful!!

Is that indiglo you have installed in your gauge area?

 

[azTony]

What are you referring to in the gauge area? I am not sure what indiglo is, please pm me

 

[murf]

Tools, what camera are you using? The detail is very sharp and your pictures look great.

 

[Blues Dawg]

Is Crash Pilot Bob a representative of "Go Pro" cameras? If so, I saw him lay his Wrangler over on its' side last spring at the Arch Canyon Jeep Jamboree.

Just curious.

Nope - he's an ex-F-4 pilot friend of mine who sometimes tags along as our token Jeep guy and representative of diversity in the [STRIKE]club[/STRIKE] group

 

[Tools R Us]

Tools, what camera are you using? The detail is very sharp and your pictures look great.

An old, beat, Pentax K200 with a basic "kit" lens. It's nothing to look at, but a camera is just a tool, so .

 

[murf]

An old, beat, Pentax K200 with a basic "kit" lens. It's nothing to look at, but a camera is just a tool, so .

Probably also helps that the air is so clean and clear there...

 

[Raulfj40]

Did you invite Caesar and crew to share some pix here?

I gave Juan a memory to give to you with all 3000+ pictures that Cesar took, thanks for building Raul ,I had a great time with it

 

[Tools R Us]

Good deal, looking forward to seeing them!

 

[Blues Dawg]

For Claudia:














Baby Blue 72 Resto w/ Paki Top

 

[azTony]

 

[azTony]

 

[azTony]