Crawl Control light not working (1 Viewer)

[Terrax]

I installed Crawl Control on the wives 2016 GX460, suspension settings and 4wd work, however CC light does not come on. I had zero calibration done via techstream. I noticed the hill descent light comes on but not the CC. Is that mean I need to redo the calibration to recognize it? Does the CC light replace the DAC light when setup?

Thanks

 

[Acrad]

Did you press the ON/OFF Crawl button before exiting Techstream?

Yes.. on the light question

 

[Terrax]

Did you press the ON/OFF Crawl button before exiting Techstream?

Yes.. on the light question

My friend ran the techstream, I wasn't watching, my guess is no. Should I just do the paperclip trick to resolve it?

 

[Acrad]

Just follow Sami's video and that should get it working for you with paper clip method. Pay attention to orientation of OBD to ensure you are using the correct pins.

460-Add Crawl Control (CC) and Multi Terrain Select (MTS) to 2010-2019 models/all trims

CLICK ME: =crawl']Crawl Control and Multi-Terrain Select (MTS) retrofit on '10-'19 GX 460 / all trims Crawl control and/or MTS can be added to any '10-'19 GX 460 regardless of trim. MTS is not available in stock US models in North America except for Canadian top tier models. Crawl Control was...

forum.ih8mud.com

 

[Terrax]

Just follow Sami's video and that should get it working for you with paper clip method. Pay attention to orientation of OBD to ensure you are using the correct pins.

460-Add Crawl Control (CC) and Multi Terrain Select (MTS) to 2010-2019 models/all trims

CLICK ME: =crawl']Crawl Control and Multi-Terrain Select (MTS) retrofit on '10-'19 GX 460 / all trims Crawl control and/or MTS can be added to any '10-'19 GX 460 regardless of trim. MTS is not available in stock US models in North America except for Canadian top tier models. Crawl Control was...

forum.ih8mud.com

Looks like the paperclips go on the #5 and #13 pins on the video, I've seen documention for #4 and #12. This is for a 2016, can you verify what pins to use?

 

[Acrad]

Correct but when you look under dash orientation will be this way

 

[re_guderian]

I'm good with techstream, and the paperclip method is way easier.

 

[Terrax]

Correct but when you look under dash orientation will be this way

View attachment 3067990

Well SOB!! Thanks for clarifying!!

 

[Wadepat2]

Paperclip was easy when I did it last week.

 

[Acrad]

Side note… ZPC on ‘20+ has to be done with TS as OBD port changed and no longer has those pins. ’20+ 4R as well

 

[Terrax]

Done!! Thanks Acrad!! One note, you have to be a ******* contortionist to do this paper clip zero calibration