For Sale Course spline 40 axle parts - Rome, GA (1 Viewer)

[Hugh Heifer]

Vehicle Model

1. 40 Series
2. 45 Series

Location

Rome, Georgia United States

I have a bunch of course 6 spline 40 parts. Like three incomplete sets.
Birfs (4), hubs (3), knuckes (6), backing plates (2), steering arms (4) and front drums (2). If anyone is in need I am looking for beers, shipping and/or trade me something I need (40 emblems, turn signals, marker lights headlight bulb mounts) This stuff does not need to go to the recycler - and it won't. If nobody wants it now it will sit in my attic.
All of it is in Rome, GA. I am willing to ship on your dime.
Most of it has been cleaned in a parts washer.

Edit: Of you don't want tk trade something I am letting this stuff go cheap to keep out of the recycler.

 

[Hugh Heifer]

Not surprisingly, I still have all this.

 

[65swb45]

Ball and claw early, or just birfield?

 

[Hugh Heifer]

Ball and claw early, or just birfield?

Just Birf.

 

[Hugh Heifer]

Bump. Be glad to tote these to GSMTR if anyone is interested.

 

[Living in the Past]

Would be interested in Birfleids that coarse ten spline on the diff end but don't believe those were ever made.
Old timers coarse spline axles were ball and claw.

 

[Hugh Heifer]

These are all out of 70 to 73 trucks. (You know, the stuff most of us have a bunch of but don't want to recycle.)

2 sets of Warn locking hubs

Set of full time flanges.
(I had never seen these before.)

 

[Living in the Past]

Set of full time flanges.
(I had never seen these before.)
View attachment 3884975

View attachment 3884976

Those some times get confused as full time 4WD instead of drive plates that came on all FJ40s until late 1970s I believe. Bought a FJ40 from an original owner. He ran full hubs caps so thought it have driven plates. It had driven plates but they were in a box from the free wheeling hubs he installed. Pull the front hub caps s ever time he locked and unlocked the hubs.

 

[JDS4x4FJ40]

Would be interested in Birfleids that coarse ten spline on the diff end but don't believe those were ever made.
Old timers coarse spline axles were ball and claw.

I am interested in the warn locking hubs, I need the 6 spline warn locking hubs. Is that what you have??

 

[Living in the Past]

I am interested in the warn locking hubs, I need the 6 spline warn locking hubs. Is that what you have??

This wasn't my ad. @Hugh Heifer is the one with Warn hubs for sale.

 

[Hugh Heifer]

I am interested in the warn locking hubs, I need the 6 spline warn locking hubs. Is that what you have??

Yes. Fit '68 to 11/72. Course outer spline count is 6.
$20 plus the ride USPs Flat Rate for the set of locking hubs. If you are interested, lemme know and I will pist better pics of the set.

 

[JDS4x4FJ40]

Yes. Fit '68 to 11/72. Course outer spline count is 6.
$20 plus the ride USPs Flat Rate for the set of locking hubs. If you are interested, lemme know and I will pist better pics of the set.

Yes, I am in San Diego, Ca , you can text me or email me. Jesse Simeroth
xxxx

 

[Hugh Heifer]

Yes, I am in San Diego, Ca , you can text me or email me. Jesse

What you are after, yes?

(Also, you may not want all your info in a public forum )

 

[JDS4x4FJ40]

What you are after, yes?
View attachment 3888836View attachment 3888837View attachment 3888838

(Also, you may not want all your info in a public forum )

Yes, I will take them.

 

[Hugh Heifer]

Updated the original post. All Warn selectors are gone. 2 birfs gone 2 hubs gone. And if you are keeping score 2 birfs, 2 hubs and 2 selectors will all ship in a large flat rate USPS box so long as you beef up the inside.

 

[BMET247]

Updated the original post. All Warn selectors are gone. 2 birfs gone 2 hubs gone. And if you are keeping score 2 birfs, 2 hubs and 2 selectors will all ship in a large flat rate USPS box so long as you beef up the inside.
View attachment 3912155

Do you have any hubs left?

 

[Hugh Heifer]

Do you have any hubs left?

Yes.
I have:
Three hubs
Four spindles
Three birfs
Four upper steering arms
Five lower bearing caps
Six knuckles