Facebook funny of the day.
LeeeeeONard has to be "translated"
LeeeeeONard has to be "translated"
Cool cars and CLC chat (2 Viewers)
- Thread starter euclid
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
So where is the order form?
Just took my step moms Pilot Elite for a spin.
This thing is like comparing an 80 to a 200 series. They took it to the next level
This thing is like comparing an 80 to a 200 series. They took it to the next level
RUNPMC likes this^
I just found my wife's new car.
Last edited:
Not all lesbians and hipsters can afford an Audi wagon like Nolen has, which is why they make Suburus.
Audi Brings Back The Hipster Wagon: The New A3 TDI Sportback [VIDEO]!
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
That looks good.
Looking back through all the old Kate build Pics.
This was one of the coolest Phases.
The rear axle was a Upside-Down 9" axle with Unimog outers.
Because of the gear reduction boxes you have to run the 3rd member upside down. This ads the problem of oiling the pinion at speed since the 9" is designed to be low.
Tom at Sunray designed a custom Geroter that picked up gear oil and channeled it through custom grooves in the Pinion housing.
The brakes on a Mog are super heavy so we took them off and then used a pinion brake on it.
Total weight was #280 and look at the clearance.
Unreal axle.
This was one of the coolest Phases.
The rear axle was a Upside-Down 9" axle with Unimog outers.
Because of the gear reduction boxes you have to run the 3rd member upside down. This ads the problem of oiling the pinion at speed since the 9" is designed to be low.
Tom at Sunray designed a custom Geroter that picked up gear oil and channeled it through custom grooves in the Pinion housing.
The brakes on a Mog are super heavy so we took them off and then used a pinion brake on it.
Total weight was #280 and look at the clearance.
Unreal axle.
BAZINGA!!
It was absolutely sick. Sick.
Basically if you could clear the front axle tube you never diffed out in the rear.
I can't imagine the time they had in that axle.
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
That is really really cool.
I would shutter at the $$$ you shelled out to build that.
Portals would be badass on a 200.
I would shutter at the $$$ you shelled out to build that.
Portals would be badass on a 200.
A 200 off-road would be badass portals or not.
Hey now!
That reminds me of the 80 on Portals... ROTW TiredironGRB
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
I had seen some prototypes for IFS portals, but I don't know if they ever came into fruition.
Stupid question:
Don't portals usually really screw up your gearing?
Stupid question:
Don't portals usually really screw up your gearing?
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
Hmm. A 200 on 40s.....(boner)
Yes. One reason why a 9" works because the high gear ratios. I had 2.50 gears in it and 5.12 in the front axle to match
Bomar
SILVER Star
I am sure in Iceland there are already alot of 200's on 40s or bigger.
