Clutch problems need help

[shadows]

Today after many hours of work i was able to awaken my rig. I installed a new holly carburetor, put a new battery in and filled it up. It had been 6 years since it had last been started an after ten minute, it turned over. https://forum.ih8mud.com/images/smilies/clap.gif

So I then tried to shift it in too gear and notice that the Clutch pedal went straight to the floor so i checked the clutch master cylinder and the lead to the clutch to see if there was any leaks or anything that look off. Well there was nothing else check the fluid and pump the clutch and noticed there was no change in fluid level. So I had the assistance of a friend who kept pumping the clutch pedal and i looked at the fluid. There was a strange dark thick fluid.

Any body ever run into something like this. If so got any advice on how to fix it?

 

[91 4runner]

The dark fluid is your piston sealing ring disintegrated, you could try to suck the muck out out and flush the system and it MAY return to service, but I would just order a new one,

 

[ARCTICMUTT]

I'd also grab a new slave while your at it.

 

[shadows]

The dark fluid is your piston sealing ring disintegrated, you could try to suck the muck out out and flush the system and it MAY return to service, but I would just order a new one,

Any idea where to locate one?

 

[91 4runner]

this is an oem one, i bought one for my 40 from him and it was way cheaper then what toyota wanted lol
(not affiliated in any way)

http://www.ebay.com/itm/Clutch-Mast...-55-/300726403430?hash=item4604b0c166&vxp=mtr

or u can get one from napa, its aftermarket but i have a buddy with a 40 rocking one

http://www.napaonline.com/Catalog/C...lutch-Master-Cylinder/_/R-ATMP9856_0318163227


there are ton of options,
Specter off road
cruiser corps
CCOT
TPI
and so on...

 

[Fast Eddy]

I installed a new holly carbureto

So sorry to hear that.

I'd also grab a new slave while your at it.

100% correct.

Any idea where to locate one?

Master and slave were in stock at my local Napa auto parts when I was in need. The master went bad after 6 months and just a couple hundred miles. They graciously replaced it under warranty, but Toyota parts would be a better value for about double the cost.

 

[Noodles40]

Any idea where to locate one?

try oreilly's. i got the beck arnley and still working fine.

 

[cruiserjunkie]

You can get a rebuild kit from cruiseroutfitters if your not in a hurry. Rebuilding them is super easy