Chinese Carb w/no fuel return (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 9, 2019
Threads
32
Messages
86
Location
Fargo
I have a pre-9/73 FJ40 with an F155 engine.

I decided to give the Amazon carb a shot. My question is, can I add a fuel return by threading and drilling out this port? Is a return line necessary?

PXL_20221107_015219421~2.jpg
PXL_20221107_015207471.jpg
 
Last edited:
Likely not necessary. Watch your float level in the sight glass (assuming it has one) and see how it goes. Keep a fire extinguisher handy on the test drive.
 
I eliminated the return line a couple years ago when I installed a similar carburetor. No issues to report! I wouldn't drill the carb.
 

Users who are viewing this thread

Back
Top Bottom