Chevy eng/trans and toyota transfer case adapter?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 24, 2007
Threads
16
Messages
45
I need to find an adapter to mate my Toyota (1970) transfer case with a Borg Warner 465 4 speed behind a 4.3 V-6. Any ideas?
 
If you already have the 10 spline output shaft on your Muncie 465, you can buy the conversion kit from classic cruisers for $375. You will just have to tap the output shaft yourself or have a machine shop do it for you. The kit comes with the bolt you will use once the shaft is tapped.
 

Users who are viewing this thread

Back
Top Bottom